Effective COMMISSION DELEGATED REGULATION (EU) 2025/2003 of 8 September 2025 amending Regulation (EU) 2021/821 of the European Parliament and of the Council as regards the list of dual-use items
Vyhláška č. 2003/2025
Important dates
Documents and links
COMMISSION DELEGATED REGULATION (EU) 2025/2003
of 8 September 2025
amending Regulation (EU) 2021/821 of the European Parliament and of the Council as regards the list of dual-use items
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) 2021/821 of the European Parliament and of the Council of 20 May 2021 setting up a Union regime for the control of exports, brokering, technical assistance, transit and transfer of dual-use items (1), and in particular Article 17(1), point (a) thereof,
Whereas:
|
(1) |
Pursuant to Regulation (EU) 2021/821 dual-use items are to be subject to authorisation and export control when they are exported from or in transit through the Union, or are delivered to a third country as a result of brokering services provided by a broker resident or established in the Union. |
|
(2) |
Annex I to Regulation (EU) 2021/821 establishes the common list of dual-use items that are subject to controls in the Union. Decisions regarding the items subject to such controls are taken within the framework of internationally agreed dual-use controls. |
|
(3) |
The list of dual-use items set out in Annex I to Regulation (EU) 2021/821 needs to be updated regularly in order to ensure full compliance with international security obligations and commitments which the Member States and, where applicable, the Union have accepted as members of the Australia Group (2), the Missile Technology Control Regime (3), the Nuclear Suppliers Group (4), the Wassenaar Arrangement (5) and the Chemical Weapons Convention (6). In this regard, the control lists adopted by the international non-proliferation regimes and export control arrangements have been changed during 2024. In addition, Member States have informed the Commission on 23 May 2025 that they have all accepted, also as members of the Wassenaar Arrangement, further commitments in order to control additional items. Annex I to Regulation (EU) 2021/821 should be amended accordingly. In order to facilitate references for export control authorities and economic operators, Annex I to Regulation (EU) 2021/821 should be replaced. |
|
(4) |
In order to ensure full compliance with international security obligations as soon as possible, this Regulation should enter into force on the day following that of its publication in the Official Journal of the European Union. |
|
(5) |
Regulation (EU) 2021/821 should therefore be amended accordingly, |
HAS ADOPTED THIS REGULATION:
Article 1
Annex I to Regulation (EU) 2021/821 is replaced by the text in the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 8 September 2025.
For the Commission
The President
Ursula VON DER LEYEN
Prílohy
ANNEX
‘ANNEX I
LIST OF DUAL-USE ITEMS REFERRED TO IN ARTICLE 3 OF THIS REGULATION
The list of dual-use items contained in this Annex implements internationally agreed dual-use controls including the Australia Group (1), the Missile Technology Control Regime (MTCR) (2), the Nuclear Suppliers Group (NSG) (3), the Wassenaar Arrangement (4) and the Chemical Weapons Convention (CWC) (5).
PART I
General Notes, Acronyms and Abbreviations, and Definitions
GENERAL NOTES TO ANNEX I
|
1. |
For control of goods which are designed or modified for military use, see the Common Military List of the European Union (6) and relevant list(s) of controls on military goods maintained by individual EU Member States. References in this Annex that state "SEE ALSO MILITARY GOODS CONTROLS" refer to the same lists. |
|
2. |
The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes.
|
|
3. |
Goods specified in this Annex include both new and used goods. |
|
4. |
In some instances, chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates, isotopically-labelled forms or all possible stereoisomers) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers. |
NUCLEAR TECHNOLOGY NOTE (NTN)
(To be read in conjunction with section E of Category 0.)
The "technology" directly associated with any goods controlled in Category 0 is controlled according to the provisions of Category 0.
"Technology" for the "development", "production" or "use" of goods under control remains under control even when applicable to non-controlled goods.
The approval of goods for export also authorises the export to the same end-user of the minimum "technology" required for the installation, operation, maintenance and repair of the goods.
Controls on "technology" transfer do not apply to information "in the public domain" or to "basic scientific research".
GENERAL TECHNOLOGY NOTE (GTN)
(To be read in conjunction with section E of Categories 1 to 9)
The export of "technology" which is "required" for the "development", "production" or "use" of goods controlled in Categories 1 to 9, is controlled according to the provisions of Categories 1 to 9.
"Technology" "required" for the "development", "production" or "use" of goods under control remains under control even when applicable to non-controlled goods.
Controls do not apply to that "technology" which is the minimum necessary for the installation, operation, maintenance (checking) or repair of those goods which are not controlled or whose export has been authorised.
|
Note: |
This does not release such "technology" specified in 1E002.e., 1E002.f., 8E002.a. and 8E002.b. |
Controls on "technology" transfers do not apply to information "in the public domain", to "basic scientific research" or to the minimum necessary information for patent applications.
NUCLEAR SOFTWARE NOTE (NSN)
(This note overrides any control within section D of Category 0)
Section D of Category 0 of this list does not control "software" which is the minimum necessary "object code" for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.
The approval of goods for export also authorises the export to the same end-user of the minimum necessary "object code" for the installation, operation, maintenance (checking) or repair of the goods
|
Note: |
The Nuclear Software Note does not release "software" specified in Category 5, Part 2 ("Information Security"). |
GENERAL SOFTWARE NOTE (GSN)
(This note overrides any control within section D of Categories 1 to 9)
Categories 1 to 9 of this list do not control "software" which is any of the following:
|
a. |
Generally available to the public by being:
|
|
b. |
"In the public domain"; or |
|
c. |
The minimum necessary "object code" for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.
|
GENERAL "INFORMATION SECURITY" NOTE (GISN)
"Information security" items or functions should be considered against the provisions in Category 5, Part 2, even if they are components, "software" or functions of other items.
EDITORIAL PRACTICES IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION
In accordance with the rules set out in the Interinstitutional style guide, for texts in English published in the Official Journal of the European Union:
|
— |
a comma is used to separate the whole number from decimals, |
|
— |
whole numbers are presented in series of three, each series being separated by a thin space. |
The text reproduced in this Annex follows the above-described practice.
ACRONYMS AND ABBREVIATIONS USED IN THIS ANNEX
For acronyms and abbreviations used as defined terms, see 'Definitions of Terms used in this Annex'.
|
ACRONYMS AND ABBREVIATIONS |
|
|
ABEC |
Annular Bearing Engineers Committee |
|
ABMA |
American Bearing Manufacturers Association |
|
ADC |
Analogue-to-Digital Converter |
|
AGMA |
American Gear Manufacturers’ Association |
|
AHRS |
Attitude and Heading Reference Systems |
|
AISI |
American Iron and Steel Institute |
|
ALE |
Atomic Layer Epitaxy |
|
ALU |
Arithmetic Logic Unit |
|
ANSI |
American National Standards Institute |
|
APP |
Adjusted Peak Performance |
|
APU |
Auxiliary Power Unit |
|
ASTM |
American Society for Testing and Materials |
|
ATC |
Air Traffic Control |
|
BJT |
Bipolar Junction Transistors |
|
BPP |
Beam Parameter Product |
|
BSC |
Base Station Controller |
|
CAD |
Computer-Aided-Design |
|
CAS |
Chemical Abstracts Service |
|
CCD |
Charge Coupled Device |
|
CDU |
Control and Display Unit |
|
CEP |
Circular Error Probable |
|
CMM |
Coordinate Measuring Machine |
|
CMOS |
Complementary Metal Oxide Semiconductor |
|
CNTD |
Controlled Nucleation Thermal Deposition |
|
CPLD |
Complex Programmable Logic Device |
|
CPU |
Central Processing Unit |
|
CVD |
Chemical Vapour Deposition |
|
CW |
Chemical Warfare |
|
CW (for lasers) |
Continuous Wave |
|
DAC |
Digital-to-Analogue Converter |
|
DANL |
Displayed Average Noise Level |
|
DBRN |
Data-Base Referenced Navigation |
|
DDS |
Direct Digital Synthesizer |
|
DMA |
Dynamic Mechanical Analysis |
|
DME |
Distance Measuring Equipment |
|
DMOSFET |
Diffused Metal Oxide Semiconductor Field Effect Transistor |
|
DS |
Directionally Solidified |
|
EB |
Exploding Bridge |
|
EB-PVD |
Electron Beam Physical Vapour Deposition |
|
EBW |
Exploding Bridge Wire |
|
ECAD |
Electronic Computer-Aided Design |
|
ECM |
Electro-Chemical Machining |
|
EDM |
Electrical Discharge Machines |
|
EFI |
Exploding Foil Initiators |
|
EIRP |
Effective Isotropic Radiated Power |
|
EMP |
Electromagnetic Pulse |
|
ENOB |
Effective Number of Bits |
|
ERF |
Electrorheological Finishing |
|
ERP |
Effective Radiated Power |
|
ESD |
Electrostatic Discharge |
|
ETO |
Emitter Turn-Off Thyristor |
|
ETT |
Electrical Triggering Thyristor |
|
EU |
European Union |
|
EUV |
Extreme Ultraviolet |
|
FADEC |
Full Authority Digital Engine Control |
|
FFT |
Fast Fourier Transform |
|
FPGA |
Field Programmable Gate Array |
|
FPIC |
Field Programmable Interconnect |
|
FPLA |
Field Programmable Logic Array |
|
FPLD |
Field Programmable Logic Device |
|
FPO |
Floating Point Operation |
|
FWHM |
Full-Width Half-Maximum |
|
GAAFET |
Gate-All-Around Field-Effect Transistor |
|
GLONASS |
Global Navigation Satellite System |
|
GNSS |
Global Navigation Satellite System |
|
GPS |
Global Positioning System |
|
GSM |
Global System for Mobile Communications |
|
GTO |
Gate Turn-off Thyristor |
|
HBT |
Heterojunction Bipolar Transistor |
|
HDMI |
High-Definition Multimedia Interface |
|
HEMT |
High Electron Mobility Transistor |
|
ICAO |
International Civil Aviation Organization |
|
IEC |
International Electrotechnical Commission |
|
IED |
Improvised Explosive Device |
|
IEEE |
Institute of Electrical and Electronic Engineers |
|
IFOV |
Instantaneous Field of View |
|
IGBT |
Insulated Gate Bipolar Transistor |
|
IGCT |
Integrated Gate Commutated Thyristor |
|
IHO |
International Hydrographic Organization |
|
ILS |
Instrument Landing System |
|
IMU |
Inertial Measurement Unit |
|
INS |
Inertial Navigation System |
|
IP |
Internet Protocol |
|
IRS |
Inertial Reference System |
|
IRU |
Inertial Reference Unit |
|
ISA |
International Standard Atmosphere |
|
ISAR |
Inverse Synthetic Aperture Radar |
|
ISO |
International Organization for Standardization |
|
ITU |
International Telecommunication Union |
|
JT |
Joule-Thomson |
|
LIDAR |
Light Detection and Ranging |
|
LIDT |
Laser Induced Damage Threshold |
|
LOA |
Length Overall |
|
LRU |
Line Replaceable Unit |
|
LTT |
Light Triggering Thyristor |
|
LUT |
Lookup Table |
|
MLS |
Microwave Landing Systems |
|
MMIC |
Monolithic Microwave Integrated Circuit |
|
MOCVD |
Metal Organic Chemical Vapour Deposition |
|
MOSFET |
Metal Oxide Semiconductor Field Effect Transistor |
|
MPM |
Microwave Power Module |
|
MRF |
Magnetorheological Finishing |
|
MRF |
Minimum Resolvable Feature size |
|
MRI |
Magnetic Resonance Imaging |
|
MTBF |
Mean-Time-Between-Failures |
|
MTTF |
Mean-Time-To-Failure |
|
NA |
Numerical Aperture |
|
NDT |
Non-Destructive Test |
|
NEQ |
Net Explosive Quantity |
|
NIJ |
National Institute of Justice |
|
OAM |
Operations, Administration or Maintenance |
|
OSI |
Open Systems Interconnection |
|
PAI |
Polyamide-imides |
|
PAR |
Precision Approach Radar |
|
PCL |
Passive Coherent Location |
|
PDK |
Process Design Kit |
|
PIN |
Personal Identification Number |
|
PMAC |
Permanent Magnet Alternating Current |
|
PMR |
Private Mobile Radio |
|
PVD |
Physical Vapour Deposition |
|
ppm |
parts per million |
|
QAM |
Quadrature-Amplitude-Modulation |
|
QE |
Quantum Efficiency |
|
RAP |
Reactive Atom Plasmas |
|
RF |
Radio Frequency |
|
rms |
root mean square |
|
RNC |
Radio Network Controller |
|
RNSS |
Regional Navigation Satellite System |
|
ROIC |
Read-out Integrated Circuit |
|
S-FIL |
Step and Flash Imprint Lithography |
|
SAR |
Synthetic Aperture Radar |
|
SAS |
Synthetic Aperture Sonar |
|
SC |
Single Crystal |
|
SCR |
Silicon Controlled Rectifier |
|
SFDR |
Spurious Free Dynamic Range |
|
SHPL |
Super High Powered Laser |
|
SLAR |
Sidelooking Airborne Radar |
|
SOI |
Silicon-on-Insulator |
|
SQUID |
Superconducting Quantum Interference Device |
|
SRA |
Shop Replaceable Assembly |
|
SRAM |
Static Random Access Memory |
|
SSB |
Single Sideband |
|
SSR |
Secondary Surveillance Radar |
|
SSS |
Side Scan Sonar |
|
TIR |
Total Indicated Reading |
|
TVR |
Transmitting Voltage Response |
|
u |
Atomic Mass Unit |
|
UPR |
Unidirectional Positioning Repeatability |
|
UTS |
Ultimate Tensile Strength |
|
UV |
Ultraviolet |
|
VJFET |
Vertical Junction Field Effect Transistor |
|
VOR |
Very High Frequency Omni-directional Range |
|
WHO |
World Health Organization |
|
WLAN |
Wireless Local Area Network |
DEFINITIONS OF TERMS USED IN THIS ANNEX
Definitions of terms between 'single quotation marks' are given in a Technical Note to the relevant item.
Definitions of terms between "double quotation marks" are as follows:
|
N.B. |
Category references are given in brackets after the defined term. |
"Accuracy" (2 3 6 7), usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value.
"Active flight control systems" (7) are systems that function to prevent undesirable "aircraft" and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control.
"Active pixel" (6) is a minimum (single) element of the solid-state array which has a photoelectric transfer function when exposed to light (electromagnetic) radiation.
"Adjusted Peak Performance" (4) is an adjusted peak rate at which "digital computers" perform 64-bit or larger floating point additions and multiplications, and is expressed in Weighted TeraFLOPS (WT) with units of 1012 adjusted floating point operations per second.
|
N.B. |
See Category 4, Technical Note. |
"Aircraft" (1 6 7 9) means a fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle.
|
N.B. |
See also "civil aircraft". |
"Airship" (9) means a power-driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air.
"All compensations available" (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine-tool model or measuring errors for the particular coordinate measuring machine are considered.
"Allocated by the ITU" (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services.
|
N.B. |
Additional and alternative allocations are not included. |
"Angular position deviation" (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position.
"Angle random walk" (7) means the angular error build up with time that is due to white noise in angular rate (IEEE 528-2001).
"APP" (4) is equivalent to "Adjusted Peak Performance".
"Asymmetric algorithm" (5) means a cryptographic algorithm using different, mathematically-related keys for encryption and decryption.
|
N.B. |
A common use of "asymmetric algorithms" is key management. |
"Authentication" (5) means verifying the identity of a user, process or device, often as a prerequisite to allowing access to resources in an information system. This includes verifying the origin or content of a message or other information, and all aspects of access control where there is no encryption of files or text except as directly related to the protection of passwords, Personal Identification Numbers (PINs) or similar data to prevent unauthorised access.
"Average output power" (6) means the total "laser" output energy, in joules, divided by the period over which a series of consecutive pulses is emitted, in seconds. For a series of uniformly spaced pulses it is equal to the total "laser" output energy in a single pulse, in joules, multiplied by the pulse frequency of the "laser", in Hertz.
"Basic scientific research" (GTN NTN) means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.
"Bias" (accelerometer) (7) means the average over a specified time of accelerometer output, measured at specified operating conditions, that has no correlation with input acceleration or rotation. "Bias" is expressed in g or in metres per second squared (g or m/s2). (IEEE 528-2001) (Micro g equals 1 × 10-6 g).
"Bias" (gyro) (7) means the average over a specified time of gyro output measured at specified operating conditions that has no correlation with input rotation or acceleration. "Bias" is typically expressed in degrees per hour (deg/hr). (IEEE 528-2001).
"Biological agents" (1) are pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment.
"Charge multiplication" (6) means a form of electronic image amplification defined as the generation of charge carriers as a result of an impact ionisation gain process. "Charge multiplication" sensors may take the form of an image intensifier tube, solid-state detector or "focal plane array"
"CEP" (7) means "Circular Error Probable" - In a circular normal distribution, the radius of the circle containing 50 % of the individual measurements being made, or the radius of the circle within which there is a 50 % probability of being located.
"Chemical mixture" (1) means a solid, liquid or gaseous product made up of two or more components which do not react together under the conditions under which the mixture is stored.
"Circulation-controlled anti-torque or circulation-controlled direction control systems" (7) are systems that use air blown over aerodynamic surfaces to increase or control the forces generated by the surfaces.
"Civil aircraft" (1 3 4 7) means those "aircraft" listed by designation in published airworthiness certification lists by the civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States to fly commercial civil internal and external routes or for legitimate civil, private or business use.
|
N.B. |
See also "aircraft". |
"Compensation systems" (6) consist of the primary scalar sensor, one or more reference sensors (e.g., vector "magnetometers") together with software that permit reduction of the rigid body rotation noise of the platform.
"Composite" (1 2 6 8 9) means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes.
"III/V compounds" (3 6) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev's periodic classification table (e.g., gallium arsenide, gallium-aluminium arsenide, indium phosphide).
"Contouring control" (2) means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated. (Reference: ISO/DIS–2806:1980).
"Critical temperature" (1 3 5) (sometimes referred to as the transition temperature) of a specific "superconductive" material means the temperature at which the material loses all resistance to the flow of direct electrical current.
"Cryptographic activation" (5) means any technique that specifically activates or enables cryptographic capability of an item, by means of a mechanism implemented by the manufacturer of the item, where this mechanism is uniquely bound to any of the following:
|
1. |
A single instance of the item; or |
|
2. |
One customer, for multiple instances of the item. |
Technical Notes:
|
1. |
"Cryptographic activation" techniques and mechanisms may be implemented as hardware, "software" or "technology". |
|
2. |
Mechanisms for "cryptographic activation" can, for example, be serial number-based licence keys or authentication instruments such as digitally signed certificates. |
"Cryptography" (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorised use. "Cryptography" is limited to the transformation of information using one or more 'secret parameters' (e.g., crypto variables) or associated key management.
Notes:
|
1. |
"Cryptography" does not include 'fixed' data compression or coding techniques. |
|
2. |
"Cryptography" includes decryption. |
Technical Notes:
|
1. |
'Secret parameter': a constant or key kept from the knowledge of others or shared only within a group. |
|
2. |
'Fixed': the coding or compression algorithm cannot accept externally supplied parameters (e.g., cryptographic or key variables) and cannot be modified by the user. |
"CW laser" (6) means a "laser" that produces a nominally constant output energy for greater than 0,25 seconds.
"Cyber incident response" (4) means the process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident.
"Data device" (def) means equipment capable of transmitting or receiving sequences of digital information.
"Data-Based Referenced Navigation" ("DBRN") (7) Systems means systems which use various sources of previously measured geo-mapping data integrated to provide accurate navigation information under dynamic conditions. Data sources include bathymetric maps, stellar maps, gravity maps, magnetic maps or 3-D digital terrain maps.
"Depleted uranium" (0) means uranium depleted in the isotope 235 below that occurring in nature.
"Development" (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.
"Diffusion bonding" (1 2) means a solid-state joining of at least two separate pieces of metals into a single piece with a joint strength equivalent to that of the weakest material, wherein the principal mechanism is interdiffusion of atoms across the interface.
"Digital computer" (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following:
|
a. |
Accept data; |
|
b. |
Store data or instructions in fixed or alterable (writable) storage devices; |
|
c. |
Process data by means of a stored sequence of instructions which is modifiable; and |
|
d. |
Provide output of data. |
|
N.B. |
Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections. |
"Digital transfer rate" (def) means the total bit rate of the information that is directly transferred on any type of medium.
|
N.B. |
See also "total digital transfer rate". |
"Drift rate" (gyro) (7) means the component of gyro output that is functionally independent of input rotation. It is expressed as an angular rate. (IEEE 528-2001).
"Effective gramme" (0 1) of "special fissile material" means:
|
a. |
For plutonium isotopes and uranium-233, the isotope weight in grammes; |
|
b. |
For uranium enriched 1 per cent or greater in the isotope uranium-235, the element weight in grammes multiplied by the square of its enrichment expressed as a decimal weight fraction; |
|
c. |
For uranium enriched below 1 per cent in the isotope uranium-235, the element weight in grammes multiplied by 0,0001; |
"Electronic assembly" (2 3 4) means a number of electronic components (i.e., 'circuit elements', 'discrete components', integrated circuits, etc.) connected together to perform (a) specific function(s), replaceable as an entity and normally capable of being disassembled.
|
N.B.1. |
'Circuit element': a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. |
|
N.B.2. |
'Discrete component': a separately packaged 'circuit element' with its own external connections. |
"Energetic materials" (1) means substances or mixtures that react chemically to release energy required for their intended application. "Explosives", "pyrotechnics" and "propellants" are subclasses of energetic materials.
"End-effectors" (2) means grippers, 'active tooling units' and any other tooling that is attached to the baseplate on the end of a "robot" manipulator arm.
|
N.B. |
'Active tooling unit' means a device for applying motive power, process energy or sensing to the workpiece. |
"Equivalent density" (6) means the mass of an optic per unit optical area projected onto the optical surface.
"Equivalent standards" (1) means comparable national or international standards recognised by one or more EU Member States or Wassenaar Arrangement Participating States and applicable to the relevant entry.
"Explosives" (1) means solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate.
"FADEC Systems" (9) means Full Authority Digital Engine Control Systems – A digital electronic control system for a gas turbine engine that is able to autonomously control the engine throughout its whole operating range from demanded engine start until demanded engine shut-down, in both normal and fault conditions.
"Fibrous or filamentary materials" (0 1 8 9) include:
|
a. |
Continuous "monofilaments"; |
|
b. |
Continuous "yarns" and "rovings"; |
|
c. |
"Tapes", fabrics, random mats and braids; |
|
d. |
Chopped fibres, staple fibres and coherent fibre blankets; |
|
e. |
Whiskers, either monocrystalline or polycrystalline, of any length; |
|
f. |
Aromatic polyamide pulp. |
"Fly-by-light system" (7) means a primary digital flight control system employing feedback to control the "aircraft" during flight, where the commands to the effectors/actuators are optical signals.
"Fly-by-wire system" (7) means a primary digital flight control system employing feedback to control the "aircraft" during flight, where the commands to the effectors/actuators are electrical signals.
"Focal plane array" (6 8) means a linear or two-dimensional planar layer, or combination of planar layers, of individual detector elements, with or without readout electronics, which work in the focal plane.
|
N.B. |
This is not intended to include a stack of single detector elements or any two, three or four element detectors provided time delay and integration is not performed within the element. |
"Fractional bandwidth" (3 5) means the "instantaneous bandwidth" divided by the centre frequency, expressed as a percentage.
"Frequency hopping" (5 6) means a form of "spread spectrum" in which the transmission frequency of a single communication channel is made to change by a random or pseudo-random sequence of discrete steps.
"Frequency switching time" (3) means the time (i.e., delay) taken by a signal when switched from an initial specified output frequency, to arrive at or within any of the following:
|
a. |
± 100 Hz of a final specified output frequency of less than 1 GHz; or |
|
b. |
± 0,1 part per million of a final specified output frequency equal to or greater than 1 GHz. |
"Fuel cell" (8) is an electrochemical device that converts chemical energy directly into Direct Current (DC) electricity by consuming fuel from an external source.
"Fusible" (1) means capable of being cross-linked or polymerized further (cured) by the use of heat, radiation, catalysts, etc., or that can be melted without pyrolysis (charring).
"Gate-All-Around Field-Effect Transistor" ("GAAFET") (3) means a device having a single or multiple semiconductor conduction channel element(s) with a common gate structure that surrounds and controls current in all of the semiconductor conduction channel elements.
|
N.B. |
This definition includes nanosheet or nanowire field-effect and surrounding gate transistors and other "GAAFET" semiconductor channel element structures. |
"Guidance set" (7) means systems that integrate the process of measuring and computing a vehicles position and velocity (i.e., navigation) with that of computing and sending commands to the vehicles flight control systems to correct the trajectory.
"Hard selectors" (5) means data or set of data, related to an individual (e.g., family name, given name, e-mail, street address, phone number or group affiliations).
"High output diesel engines" (9) means diesel engines with a specified brake mean effective pressure of 1,8 MPa or more at a speed of 2 300 r.p.m., provided the rated speed is 2 300 r.p.m. or more.
"Hybrid integrated circuit" (3) means any combination of integrated circuit(s), or integrated circuit with 'circuit elements' or 'discrete components' connected together to perform (a) specific function(s), and having all of the following characteristics:
|
a. |
Containing at least one unencapsulated device; |
|
b. |
Connected together using typical IC production methods; |
|
c. |
Replaceable as an entity; and |
|
d. |
Not normally capable of being disassembled. |
|
N.B.1. |
'Circuit element': a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. |
|
N.B.2. |
'Discrete component': a separately packaged 'circuit element' with its own external connections. |
"Image enhancement" (4) means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration.
"Immunotoxin" (1) is a conjugate of one cell specific monoclonal antibody and a "toxin" or "sub-unit of toxin", that selectively affects diseased cells.
"In the public domain" (GTN NTN GSN), as it applies herein, means "technology" or "software" which has been made available without restrictions upon its further dissemination (copyright restrictions do not remove "technology" or "software" from being "in the public domain").
"Information security" (GSN GISN 5) is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes "cryptography", "cryptographic activation", 'cryptanalysis', protection against compromising emanations and computer security.
Technical Note:
'Cryptanalysis': analysis of a cryptographic system or its inputs and outputs to derive confidential variables or sensitive data, including clear text.
"Instantaneous bandwidth" (3 5 7) means the bandwidth over which output power remains constant within 3 dB without adjustment of other operating parameters.
"Interior lining" (9) is suited for the bond interface between the solid propellant and the case or insulating liner. Usually a liquid polymer based dispersion of refractory or insulating materials, e.g. carbon filled hydroxyl terminated polybutadiene (HTPB) or other polymer with added curing agents sprayed or screeded over a case interior.
"Interleaved Analogue-to-Digital Converter (ADC)" (3) means devices that have multiple ADC units that sample the same analogue input at different times such that when the outputs are aggregated, the analogue input has been effectively sampled and converted at a higher sampling rate.
"Intrinsic Magnetic Gradiometer" (6) is a single magnetic field gradient sensing element and associated electronics the output of which is a measure of magnetic field gradient.
|
N.B. |
See also "Magnetic Gradiometer". |
"Intrusion software" (4 5) means "software" specially designed or modified to avoid detection by 'monitoring tools', or to defeat 'protective countermeasures', of a computer or network-capable device, and performing any of the following:
|
a. |
The extraction of data or information, from a computer or network-capable device, or the modification of system or user data; or |
|
b. |
The modification of the standard execution path of a program or process in order to allow the execution of externally provided instructions. |
Notes:
|
1. |
"Intrusion software" does not include any of the following:
|
|
2. |
Network-capable devices include mobile devices and smart meters. |
Technical Notes:
|
1. |
'Monitoring tools': "software" or hardware devices, that monitor system behaviours or processes running on a device. This includes antivirus (AV) products, end point security products, Personal Security Products (PSP), Intrusion Detection Systems (IDS), Intrusion Prevention Systems (IPS) or firewalls. |
|
2. |
'Protective countermeasures': techniques designed to ensure the safe execution of code, such as Data Execution Prevention (DEP), Address Space Layout Randomisation (ASLR) or sandboxing. |
"Isolated live cultures" (1) includes live cultures in dormant form and in dried preparations.
"Isostatic presses" (2) mean equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material.
"Laser" (0 1 2 3 5 6 7 8 9) is an item that produces spatially and temporally coherent light through amplification by stimulated emission of radiation.
|
N.B. See also |
"CW laser";
"Super High Power Laser". |
"Library" (1) (parametric technical database) means a collection of technical information, reference to which may enhance the performance of relevant systems, equipment or components.
"Lighter-than-air vehicles" (9) means balloons and "airships" that rely on hot air or other lighter-than-air gases such as helium or hydrogen for their lift.
"Linearity" (2) (Usually measured in terms of non-linearity) means the maximum deviation of the actual characteristic (average of upscale and downscale readings), positive or negative, from a straight line so positioned as to equalise and minimise the maximum deviations.
"Local area network" (4 5) is a data communication system having all of the following characteristics:
|
a. |
Allows an arbitrary number of independent "data devices" to communicate directly with each other; and |
|
b. |
Is confined to a geographical area of moderate size (e.g., office building, plant, campus, warehouse). |
"Magnetic Gradiometers" (6) are instruments designed to detect the spatial variation of magnetic fields from sources external to the instrument. They consist of multiple "magnetometers" and associated electronics the output of which is a measure of magnetic field gradient.
|
N.B. |
See also "Intrinsic Magnetic Gradiometer". |
"Magnetometers" (6) are instruments designed to detect magnetic fields from sources external to the instrument. They consist of a single magnetic field sensing element and associated electronics the output of which is a measure of the magnetic field.
"Materials resistant to corrosion by UF6 " (0) include copper, copper alloys, stainless steel, aluminium, aluminium oxide, aluminium alloys, nickel or alloys containing 60 % or more nickel by weight and fluorinated hydrocarbon polymers.
"Maintenance Level I" (7) means the failure of an inertial navigation unit is detected on the "aircraft" by indications from the Control and Display Unit (CDU) or by the status message from the corresponding sub-system. By following the manufacturer's manual, the cause of the failure may be localised at the level of the malfunctioning Line Replaceable Unit (LRU). The operator then removes the LRU and replaces it with a spare.
"Maintenance Level II" (7) means the defective LRU is sent to the maintenance workshop (the manufacturer's or that of the operator responsible for level II maintenance). At the maintenance workshop, the malfunctioning LRU is tested by various appropriate means to verify and localise the defective Shop Replaceable Assembly (SRA) module responsible for the failure. This SRA is removed and replaced by an operative spare. The defective SRA (or possibly the complete LRU) is then shipped to the manufacturer. "Maintenance Level II" does not include the disassembly or repair of specified accelerometers or gyro sensors.
"Matrix" (1 2 8 9) means a substantially continuous phase that fills the space between particles, whiskers or fibres.
"Measurement uncertainty" (2) is the characteristic parameter which specifies in what range around the output value the correct value of the measurable variable lies with a confidence level of 95 %. It includes the uncorrected systematic deviations, the uncorrected backlash and the random deviations (ref. ISO 10360-2).
"Microcomputer microcircuit" (3) means a "monolithic integrated circuit" or "multichip integrated circuit" containing an arithmetic logic unit (ALU) capable of executing general purpose instructions from an internal storage, on data contained in the internal storage.
|
N.B. |
The internal storage may be augmented by an external storage. |
"Microprocessor microcircuit" (3) means a "monolithic integrated circuit" or "multichip integrated circuit" containing an arithmetic logic unit (ALU) capable of executing a series of general purpose instructions from an external storage.
|
N.B.1. |
The "microprocessor microcircuit" normally does not contain integral user-accessible storage, although storage present on-the-chip may be used in performing its logic function. |
|
N.B.2. |
This includes chip sets which are designed to operate together to provide the function of a "microprocessor microcircuit". |
"Microorganisms" (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures.
"Missiles" (1 2 3 6 7 9) means complete rocket systems and unmanned aerial vehicle systems, capable of delivering at least 500 kg payload to a range of at least 300 km.
"Monofilament" (1) or filament is the smallest increment of fibre, usually several micrometres in diameter.
"Monolithic integrated circuit" (3) means a combination of passive or active 'circuit elements' or both which:
|
a. |
Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called chip; |
|
b. |
Can be considered as indivisibly associated; and |
|
c. |
Perform the function(s) of a circuit. |
|
N.B. |
'Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. |
"Monolithic Microwave Integrated Circuit" ("MMIC") (3 5) means a "monolithic integrated circuit" that operates at microwave or millimetre wave frequencies.
"Monospectral imaging sensors" (6) are capable of acquisition of imaging data from one discrete spectral band.
"Multichip integrated circuit" (3) means two or more "monolithic integrated circuits" bonded to a common "substrate".
"Multiple channel Analogue-to-Digital Converter (ADC)" (3) means devices that integrate more than one ADC, designed so that each ADC has a separate analogue input.
"Multispectral imaging sensors" (6) are capable of simultaneous or serial acquisition of imaging data from two or more discrete spectral bands. Sensors having more than twenty discrete spectral bands are sometimes referred to as hyperspectral imaging sensors.
"Non-repetitive pulsed" (6) means "lasers" that produce either a single output pulse or that have a time interval between pulses exceeding one minute.
"Natural uranium" (0) means uranium containing the mixtures of isotopes occurring in nature.
"Nuclear reactor" (0) means a complete reactor capable of operation so as to maintain a controlled self-sustaining fission chain reaction. A "nuclear reactor" includes all the items within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain, come into direct contact with or control the primary coolant of the reactor core.
"Numerical control" (2) means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress (Reference: ISO 2382:2015).
"Object code" (GSN) means an equipment executable form of a convenient expression of one or more processes ("source code" (source language)) which has been compiled by programming system.
"Operations, Administration or Maintenance" ("OAM") (5) means performing one or more of the following tasks:
|
a. |
Establishing or managing any of the following:
|
|
b. |
Monitoring or managing the operating condition or performance of an item; or |
|
c. |
Managing logs or audit data in support of any of the tasks described in paragraphs a. or b. |
|
Note: |
"OAM" does not include any of the following tasks or their associated key management functions:
|
"Optical integrated circuit" (3) means a "monolithic integrated circuit" or a "hybrid integrated circuit", containing one or more parts designed to function as a photosensor or photoemitter or to perform (an) optical or (an) electro-optical function(s).
"Participating state" (7 9) is a state participating in the Wassenaar Arrangement. (See www.wassenaar.org)
"Peak power" (6) means the highest power attained in the "pulse duration".
"Personal area network" (5) means a data communication system having all of the following characteristics:
|
a. |
Allows an arbitrary number of independent or interconnected "data devices" to communicate directly with each other; and |
|
b. |
Is confined to the communication between devices within the immediate physical vicinity of an individual person or device controller (e.g., single room, office, or automobile). |
Technical Note:
The "local area network" extends beyond the geographical area of the "personal area network".
"Previously separated" (1) is the application of any process intended to increase the concentration of the controlled isotope.
"Principal element" (4), as it applies in Category 4, is a "principal element" when its replacement value is more than 35 % of the total value of the system of which it is an element. Element value is the price paid for the element by the manufacturer of the system, or by the system integrator. Total value is the normal international selling price to unrelated parties at the point of manufacture or consolidation of shipment.
"Production" (GTN NTN All) means all production phases, such as: construction, production engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance.
"Production equipment" (1 7 9) means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or more phases of "production".
"Production facilities" (7 9) means "production equipment" and specially designed software therefor integrated into installations for "development" or for one or more phases of "production".
"Program" (1 7) means a sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.
"Pulse compression" (6) means the coding and processing of a radar signal pulse of long time duration to one of short time duration, while maintaining the benefits of high pulse energy.
"Pulse duration" (6) is the duration of a "laser" pulse and means the time between the half-power points on the leading edge and trailing edge of an individual pulse.
"Quantum cryptography" (5) means a family of techniques for the establishment of shared key for "cryptography" by measuring the quantum-mechanical properties of a physical system (including those physical properties explicitly governed by quantum optics, quantum field theory or quantum electrodynamics).
"Radar spread spectrum" (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding.
"Radiant sensitivity" (6) is Radiant sensitivity (mA/W) = 0,807 × (wavelength in nm) × Quantum Efficiency (QE).
Technical Note:
QE is usually expressed as a percentage; however, for the purposes of this formula QE is expressed as a decimal number less than one, e.g., 78 % is 0,78.
"Real-time processing" (6) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event.
"Repeatability" (7) means the closeness of agreement among repeated measurements of the same variable under the same operating conditions when changes in conditions or non-operating periods occur between measurements. (Reference: IEEE 528-2001 (one sigma standard deviation))
"Required" (GTN 3 5 6 7 9), as applied to "technology", refers to only that portion of "technology" which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such "required" "technology" may be shared by different goods.
"Riot control agent" (1) means substances which, under the expected conditions of use for riot control purposes, produce rapidly in humans sensory irritation or disabling physical effects which disappear within a short time following termination of exposure.
Technical Note:
Tear gases are a subset of "riot control agents".
"Robot" (2 8) means a manipulation mechanism, which may be of the continuous path or of the point-to-point variety, may use sensors, and has all the following characteristics:
|
a. |
Is multifunctional; |
|
b. |
Is capable of positioning or orienting material, parts, tools or special devices through variable movements in three dimensional space; |
|
c. |
Incorporates three or more closed or open loop servo-devices which may include stepping motors; and |
|
d. |
Has "user accessible programmability" by means of teach/playback method or by means of an electronic computer which may be a programmable logic controller, i.e., without mechanical intervention. |
|
N.B. |
The above definition does not include the following devices:
|
"Roving" (1) is a bundle (typically 12-120) of approximately parallel 'strands'.
|
N.B. |
'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. |
"Sample rate" (3) for an Analogue-to-Digital Converter (ADC) means the maximum number of samples that are measured at the analogue input over a period of one second, except for oversampling ADCs. For oversampling ADCs the "sample rate" is taken to be its output word rate. "Sample rate" may also be referred to as sampling rate, usually specified in Mega Samples Per Second (MSPS) or Giga Samples Per Second (GSPS), or conversion rate, usually specified in Hertz (Hz).
"Satellite" (5 9) means a "spacecraft", other than a "space vehicle", designed to operate in orbit around Earth or another celestial body; "satellites" include orbital space stations.
"Satellite navigation system" (5 7) means a system consisting of ground stations, a constellation of "satellites", and receivers, that enables receiver locations to be calculated on the basis of signals received from the "satellites". It includes Global Navigation Satellite Systems (GNSS) and Regional Navigation Satellite Systems (RNSS).
"Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured. Scale factor is generally evaluated as the slope of the straight line that can be fitted by the method of least squares to input-output data obtained by varying the input cyclically over the input range.
"Signal analysers" (3) means apparatus capable of measuring and displaying basic properties of the single-frequency components of multi-frequency signals.
"Signal processing" (3 4 5 6) means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform).
"Software" (GSN All) means a collection of one or more "programs" or 'microprograms' fixed in any tangible medium of expression.
|
N.B. |
'Microprogram' means a sequence of elementary instructions, maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction into an instruction register. |
"Source code" (or source language) (6 7 9) is a convenient expression of one or more processes which may be turned by a programming system into equipment executable form ("object code" (or object language)).
"Spacecraft" (5 9) means a craft designed to operate in, persist in or transit through space in the form of a "satellite", "space probe", or "space vehicle".
|
Note: |
"Spacecraft" does not include landers, rovers, or other craft, limited by design to operate on or beneath the surface of, or in the atmosphere of an extra-terrestrial celestial body, or "sub-orbital craft". |
"Spacecraft bus" (9) means equipment that provides the support infrastructure of the "spacecraft" and location for the "spacecraft mission equipment".
"Spacecraft mission equipment" (9) means equipment designed to be located on a "spacecraft bus", and to perform a mission in space or to enable the "spacecraft" to perform its mission (e.g., communications, observation, science, transport).
Technical Note:
"Spacecraft mission equipment" is sometimes referred to as a spacecraft payload.
"Space probe" (9) means a "spacecraft", other than a "satellite" or "space vehicle", designed not to return to Earth.
"Space vehicle" (9) means a "spacecraft" designed to provide transport for cargo or passengers.
|
Note: |
"Space vehicles" include craft designed to safely return to Earth. |
"Space-qualified" (3 6 7) means designed, manufactured or qualified through successful testing, for operation at altitudes greater than 100 km above the surface of the Earth.
|
N.B. |
A determination that a specific item is "Space-qualified" by virtue of testing does not mean that other items in the same production run or model series are "Space-qualified" if not individually tested. |
"Special fissile material" (0) means plutonium-239, uranium-233, "uranium enriched in the isotopes 235 or 233", and any material containing the foregoing.
"Specific modulus" (0 1 9) is Young's modulus in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2) °C) and a relative humidity of (50 ± 5) %.
"Specific tensile strength" (0 1 9) is ultimate tensile strength in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2) °C) and a relative humidity of (50 ± 5) %.
"Spinning mass gyros" (7) means gyros which use a continually rotating mass to sense angular motion.
"Spread spectrum" (5) means the technique whereby energy in a relatively narrow-band communication channel is spread over a much wider energy spectrum.
"Spread spectrum" radar (6) - see "Radar spread spectrum".
"Stability" (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.
"States (not) Party to the Chemical Weapon Convention" (1) are those states for which the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons has (not) entered into force. (See www.opcw.org )
"Steady State Mode" (9) defines engine operation conditions, where the engine parameters, such as thrust/power, rpm and others, have no appreciable fluctuations, when the ambient air temperature and pressure at the engine inlet are constant.
"Strong mechanical bond" (9) means a bond having a bond strength equal to or greater than propellant strength.
"Sub-orbital craft" (9) means a craft having an enclosure designed for the transport of people or cargo which is designed to:
|
a. |
Operate above the stratosphere; |
|
b. |
Only perform a non-orbital trajectories; and |
|
c. |
Land back on Earth with the people or cargo intact. |
"Substrate" (3) means a sheet of base material with or without an interconnection pattern and on which or within which 'discrete components' or integrated circuits or both can be located.
|
N.B.1. |
'Discrete component': a separately packaged 'circuit element' with its own external connections. |
|
N.B.2. |
'Circuit element': a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. |
"Substrate blanks" (3 6) means monolithic compounds with dimensions suitable for the production of optical elements such as mirrors or optical windows.
"Sub-unit of toxin" (1) is a structurally and functionally discrete component of a whole "toxin".
"Superalloys" (2 9) means nickel-, cobalt- or iron-base alloys having a stress rupture life greater than 1 000 hours at 400 MPa and an ultimate tensile strength greater than 850 MPa, at 922 K (649 °C) or higher.
"Superconductive" (1 3 5 6 8) means materials, i.e., metals, alloys or compounds, which can lose all electrical resistance, i.e., which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating.
|
N.B. |
The "superconductive" state of a material is individually characterised by a "critical temperature", a critical magnetic field, which is a function of temperature, and a critical current density which is, however, a function of both magnetic field and temperature. |
"Super High Power Laser" ("SHPL") (6) means a "laser" capable of delivering (the total or any portion of) the output energy exceeding 1 kJ within 50 ms or having an average or CW power exceeding 20 kW.
"Superplastic forming" (1 2) means a deformation process using heat for metals that are normally characterised by low values of elongation (less than 20 %) at the breaking point as determined at room temperature by conventional tensile strength testing, in order to achieve elongations during processing which are at least 2 times those values.
"Tape" (1) is a material constructed of interlaced or unidirectional "monofilaments", 'strands', "rovings", "tows", or "yarns", etc., usually pre-impregnated with resin.
|
N.B. |
'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. |
"Technology" (GTN NTN All) means specific information necessary for the "development", "production" or "use" of goods. This information takes the form of 'technical data' or 'technical assistance'.
|
N.B.1. |
'Technical assistance' may take forms such as instructions, skills, training, working knowledge and consulting services and may involve the transfer of 'technical data'. |
|
N.B.2. |
'Technical data' may take forms such as blueprints, plans, diagrams, models, formulae, algorithms, tables, engineering designs and specifications, manuals and instructions written or recorded on other media or devices such as disk, tape, read-only memories. |
"Tilting spindle" (2) means a tool-holding spindle which alters, during the machining process, the angular position of its centre line with respect to any other axis.
"Time constant" (6) is the time taken from the application of a light stimulus for the current increment to reach a value of 1-1/e times the final value (i.e., 63 % of the final value).
"Time-to-steady-state registration" (6) (also referred to as the gravimeter’s response time) is the time over which the disturbing effects of platform induced accelerations (high frequency noise) are reduced.
"Tip shroud" (9) means a stationary ring component (solid or segmented) attached to the inner surface of the engine turbine casing or a feature at the outer tip of the turbine blade, which primarily provides a gas seal between the stationary and rotating components.
"Total control of flight" (7) means an automated control of "aircraft" state variables and flight path to meet mission objectives responding to real time changes in data regarding objectives, hazards or other "aircraft".
"Total digital transfer rate" (5) means the number of bits, including line coding, overhead and so forth per unit time passing between corresponding equipment in a digital transmission system.
|
N.B. |
See also "digital transfer rate". |
"Tow" (1) is a bundle of "monofilaments", usually approximately parallel.
"Toxins" (1 2) means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of "microorganisms".
"Tunable" (6) means the ability of a "laser" to produce a continuous output at all wavelengths over a range of several "laser" transitions. A line selectable "laser" produces discrete wavelengths within one "laser" transition and is not considered "tunable".
"Unidirectional positioning repeatability" (2) means the smaller of values R↑ and R↓ (forward and backward), as defined by 3.21 of ISO 230-2:2014 or national equivalents, of an individual machine tool axis.
"Unmanned Aerial Vehicle" ("UAV") (9) means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.
"Uranium enriched in the isotopes 235 or 233" (0) means uranium containing the isotopes 235 or 233, or both, in an amount such that the abundance ratio of the sum of these isotopes to the isotope 238 is more than the ratio of the isotope 235 to the isotope 238 occurring in nature (isotopic ratio 0,71 per cent).
"Use" (GTN NTN All) means operation, installation (including on-site installation), maintenance (checking), repair, overhaul and refurbishing.
"User-accessible programmability" (6) means the facility allowing a user to insert, modify or replace "programs" by means other than:
|
a. |
A physical change in wiring or interconnections; or |
|
b. |
The setting of function controls including entry of parameters. |
"Vaccine" (1) is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered.
"Vacuum electronic devices" (3) means electronic devices based on the interaction of an electron beam with an electromagnetic wave propagating in a vacuum circuit or interacting with radio-frequency vacuum cavity resonators. "Vacuum electronic devices" include klystrons, travelling-wave tubes, and their derivatives.
"Vulnerability disclosure" (4) means the process of identifying, reporting or communicating a vulnerability to, or analysing a vulnerability with, individuals or organisations responsible for conducting or coordinating remediation for the purposes of resolving the vulnerability.
"Wall-plug efficiency" (6) means the ratio of "laser" output power (or "average output power") to total electrical input power required to operate the "laser", including the power supply/conditioning and thermal conditioning/heat exchanger.
"Yarn" (1) is a bundle of twisted 'strands'.
|
N.B. |
'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. |
PART II
Category 0
CATEGORY 0 - NUCLEAR MATERIALS, FACILITIES AND EQUIPMENT
0A Systems, Equipment and Components
|
0A001 |
"Nuclear reactors" and specially designed or prepared equipment and components therefor, as follows:
|
0B Test, Inspection and Production Equipment
|
0B001 |
Plant for the separation of isotopes of "natural uranium", "depleted uranium" or "special fissile materials", and specially designed or prepared equipment and components therefor, as follows:
|
|
0B002 |
Specially designed or prepared auxiliary systems, equipment and components as follows, for isotope separation plant specified in 0B001, made of or protected by "materials resistant to corrosion by UF6":
|
|
0B003 |
Plant for the conversion of uranium and equipment specially designed or prepared therefor, as follows:
|
|
0B004 |
Plant for the production or concentration of heavy water, deuterium and deuterium compounds and specially designed or prepared equipment and components therefor, as follows:
|
|
0B005 |
Plant specially designed for the fabrication of "nuclear reactor" fuel elements and specially designed or prepared equipment therefor.
Technical Note: Specially designed or prepared equipment for the fabrication of "nuclear reactor" fuel elements includes equipment which:
|
|
0B006 |
Plant for the reprocessing of irradiated "nuclear reactor" fuel elements, and specially designed or prepared equipment and components therefor.
|
|
0B007 |
Plant for the conversion of plutonium and equipment specially designed or prepared therefor, as follows:
|
0C Materials
|
0C001 |
"Natural uranium" or "depleted uranium" or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing;
|
|
0C002 |
"Special fissile materials"
|
|
0C003 |
Deuterium, heavy water (deuterium oxide) and other compounds of deuterium, and mixtures and solutions containing deuterium, in which the isotopic ratio of deuterium to hydrogen exceeds 1:5 000. |
|
0C004 |
Graphite having a purity level better than 5 parts per million 'boron equivalent' and with a density greater than 1,50 g/cm3 for use in a "nuclear reactor", in quantities exceeding 1 kg.
|
|
0C005 |
Specially prepared compounds or powders for the manufacture of gaseous diffusion barriers, resistant to corrosion by UF6 (e.g. nickel or alloys containing 60 % by weight or more nickel, aluminium oxide and fully fluorinated hydrocarbon polymers), having a purity of 99,9 % by weight or more and a particle size less than 10 μm measured by ASTM B330 standard and a high degree of particle size uniformity. |
0D Software
|
0D001 |
"Software" specially designed or modified for the "development", "production" or "use" of goods specified in this Category. |
0E Technology
|
0E001 |
"Technology" according to the Nuclear Technology Note for the "development", "production" or "use" of goods specified in this Category. |
PART III
Category 1
CATEGORY 1 – SPECIAL MATERIALS AND RELATED EQUIPMENT
1A Systems, Equipment and Components
|
1A001 |
Components made from fluorinated compounds, as follows:
|
|
1A002 |
"Composite" structures or laminates, as follows:
|
|
1A003 |
Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
|
|
1A004 |
Protective and detection equipment and components not specially designed for military use, as follows:
Technical Notes:
|
|
1A005 |
Body armour and components therefor, as follows:
|
|
1A006 |
Equipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
|
|
1A007 |
Equipment and devices, specially designed to initiate charges and devices containing "energetic materials", by electrical means, as follows:
Technical Note: For the purposes of 1A007, the word initiator or igniter is sometimes used in place of the word detonator.
|
|
1A008 |
Charges, devices and components, as follows:
|
|
1A102 |
Resaturated pyrolised carbon-carbon components designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104. |
|
1A202 |
Composite structures, other than those specified in 1A002, in the form of thin-walled tubes and having all of the following characteristics:
|
|
1A225 |
Wet-proofed platinised catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from water or for the production or upgrading of heavy water.
Technical Note: In heavy water moderated reactors, upgraders maintain the heavy water concentration in the reactor core. Wet-proofed platinised catalysts can also be used to upgrade heavy water. |
|
1A226 |
Specialised packings which may be used in separating heavy water from ordinary water, having both of the following characteristics:
|
|
1A227 |
High-density (lead glass or other) radiation shielding windows, having all of the following characteristics, and specially designed frames therefor:
Technical Note: In 1A227 the term 'cold area' means the viewing area of the window exposed to the lowest level of radiation in the design application. |
1B Test, Inspection and Production Equipment
|
1B001 |
Equipment designed for the "production" of "composite" structures or laminates or "fibrous or filamentary materials", as follows, and specially designed components and accessories therefor:
Technical Notes: For the purpose of 1B001:
|
|
1B002 |
Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
|
|
1B003 |
Tools, dies, moulds or fixtures, for "superplastic forming" or "diffusion bonding" titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
|
|
1B101 |
Equipment, other than that specified in 1B001, for the "production" of structural composites as follows; and specially designed components and accessories therefor:
|
|
1B102 |
Metal powder "production equipment", other than that specified in 1B002, and components as follows:
|
|
1B115 |
Equipment, other than that specified in 1B002 or 1B102, for the production of propellant and propellant constituents, as follows, and specially designed components therefor:
|
|
1B116 |
Specially designed nozzles for producing pyrolitically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1 573 K (1 300 °C) to 3 173 K (2 900 °C) temperature range at pressures of 130 Pa to 20 kPa. |
|
1B117 |
Batch mixers having all of the following, and specially designed components therefor:
|
|
1B118 |
Continuous mixers having all of the following, and specially designed components therefor:
|
|
1B119 |
Fluid energy mills usable for grinding or milling substances specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls, and specially designed components therefor. |
|
1B201 |
Filament winding machines, other than those specified in 1B001 or 1B101, and related equipment, as follows:
|
|
1B225 |
Electrolytic cells for fluorine production with an output capacity greater than 250 g of fluorine per hour. |
|
1B226 |
Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater.
|
|
1B228 |
Hydrogen-cryogenic distillation columns having all of the following characteristics:
Technical Note 1: In 1B228 'effective length' means the active height of packing material in a packed-type column, or the active height of internal contactor plates in a plate-type column. Technical Note 2: Equivalent materials could include, but are not limited to the following materials:
|
|
1B230 |
Pumps capable of circulating solutions of concentrated or dilute potassium amide catalyst in liquid ammonia (KNH2/NH3), having all of the following characteristics:
|
|
1B231 |
Tritium facilities or plants, and equipment therefor, as follows:
|
|
1B232 |
Turboexpanders or turboexpander-compressor sets having both of the following characteristics:
|
|
1B233 |
Lithium isotope separation facilities or plants, and systems and equipment therefor, as follows:
|
|
1B234 |
High explosive containment vessels, chambers, containers and other similar containment devices designed for the testing of high explosives or explosive devices and having both of the following characteristics:
|
|
1B235 |
Target assemblies and components for the production of tritium as follows:
Technical Note: Components specially designed for target assemblies for the production of tritium may include lithium pellets, tritium getters, and specially-coated cladding. |
1C Materials
Technical Note:
Metals and alloys:
Unless provision to the contrary is made, the words 'metals' and 'alloys' in 1C001 to 1C012 cover crude and semi-fabricated forms, as follows:
Crude forms:
Anodes, balls, bars (including notched bars and wire bars), billets, blocks, blooms, brickets, cakes, cathodes, crystals, cubes, dice, grains, granules, ingots, lumps, pellets, pigs, powder, rondelles, shot, slabs, slugs, sponge, sticks;
Semi-fabricated forms (whether or not coated, plated, drilled or punched):
|
a. |
Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e., angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire; |
|
b. |
Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy. |
The object of the control should not be defeated by the export of non-listed forms alleged to be finished products but representing in reality crude forms or semi-fabricated forms.
|
1C001 |
Materials specially designed for absorbing electromagnetic radiation, or intrinsically conductive polymers, as follows:
|
|
1C002 |
Metal alloys, metal alloy powder and alloyed materials, as follows:
Technical Note: For the purposes of 1C002, metal alloys are those containing a higher percentage by weight of the stated metal than of any other element.
Technical Notes: For the purposes of 1C002:
|
|
1C003 |
Magnetic metals, of all types and of whatever form, having any of the following:
|
|
1C004 |
Uranium titanium alloys or tungsten alloys with a "matrix" based on iron, nickel or copper, having all of the following:
|
|
1C005 |
"Superconductive""composite" conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows:
Technical Note: For the purposes of 1C005 'filaments' may be in wire, cylinder, film, tape or ribbon form. |
|
1C006 |
Fluids and lubricating materials, as follows:
|
|
1C007 |
Ceramic powders, ceramic-"matrix""composite" materials and 'precursor materials', as follows:
Technical Note: For the purposes of 1C007, 'precursor materials' are special purpose polymeric or metallo-organic materials used for the "production" of silicon carbide, silicon nitride, or ceramics with silicon, carbon and nitrogen. |
|
1C008 |
Non-fluorinated polymeric substances as follows:
Technical Notes:
|
|
1C009 |
Unprocessed fluorinated compounds as follows:
|
|
1C010 |
"Fibrous or filamentary materials", as follows:
Technical Notes:
|
|
1C011 |
Metals and compounds, as follows:
|
|
1C012 |
Materials as follows:
Technical Note: For the purposes of 1C012., these materials are typically used for nuclear heat sources.
|
|
1C101 |
Materials and devices for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures, other than those specified in 1C001, usable in 'missiles', "missile" subsystems or unmanned aerial vehicles specified in 9A012 or 9A112.a.
Technical Note: In 1C101 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
1C102 |
Resaturated pyrolised carbon-carbon materials designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104. |
|
1C107 |
Graphite and ceramic materials, other than those specified in 1C007, as follows:
|
|
1C111 |
Propellants and constituent chemicals for propellants, other than those specified in 1C011, as follows:
|
|
1C116 |
Maraging steels, useable in 'missiles', having all of the following:
Technical Note 1: Maraging steels are iron alloys:
Technical Note 2: In 1C116 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
1C117 |
Materials for the fabrication of 'missiles' components as follows:
Technical Note: In 1C117 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
1C118 |
Titanium-stabilised duplex stainless steel (Ti-DSS) having all of the following:
|
|
1C202 |
Alloys, other than those specified in 1C002.b.3. or .b.4., as follows:
Technical Note: The phrase alloys 'capable of' encompasses alloys before or after heat treatment. |
|
1C210 |
'Fibrous or filamentary materials' or prepregs, other than those specified in 1C010.a., .b. or .e., as follows:
|
|
1C216 |
Maraging steel, other than that specified in 1C116, 'capable of' an ultimate tensile strength of 1 950 MPa or more, at 293 K (20 °C).
Technical Note: The phrase maraging steel 'capable of' encompasses maraging steel before or after heat treatment.
|
|
1C227 |
Calcium having both of the following characteristics:
|
|
1C228 |
Magnesium having both of the following characteristics:
|
|
1C229 |
Bismuth having both of the following characteristics:
|
|
1C230 |
Beryllium metal, alloys containing more than 50 % beryllium by weight, beryllium compounds, manufactures thereof, and waste or scrap of any of the foregoing, other than that specified in the Military Goods Controls.
|
|
1C231 |
Hafnium metal, alloys containing more than 60 % hafnium by weight, hafnium compounds containing more than 60 % hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing. |
|
1C232 |
Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing.
|
|
1C233 |
Lithium enriched in the lithium-6 (6Li) isotope to greater than its natural isotopic abundance, and products or devices containing enriched lithium, as follows: elemental lithium, alloys, compounds, mixtures containing lithium, manufactures thereof, waste or scrap of any of the foregoing.
Technical Note: The natural isotopic abundance of lithium-6 is approximately 6,5 weight per cent (7,5 atom per cent). |
|
1C234 |
Zirconium with a hafnium content of less than 1 part hafnium to 500 parts zirconium by weight, as follows: metal, alloys containing more than 50 % zirconium by weight, compounds, manufactures thereof, waste or scrap of any of the foregoing, other than those specified in 0A001.f.
|
|
1C235 |
Tritium, tritium compounds, mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1 000, and products or devices containing any of the foregoing.
|
|
1C236 |
'Radionuclides' appropriate for making neutron sources based on alpha-n reaction, other than those specified in 0C001 and 1C012.a., in the following forms:
Technical Note: In 1C236 'radionuclides' are any of the following:
|
|
1C237 |
Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of the foregoing.
|
|
1C238 |
Chlorine trifluoride (ClF3). |
|
1C239 |
High explosives, other than those specified in the Military Goods Controls, or substances or mixtures containing more than 2 % by weight thereof, with a crystal density greater than 1,8 g/cm3 and having a detonation velocity greater than 8 000 m/s. |
|
1C240 |
Nickel powder and porous nickel metal, other than those specified in 0C005, as follows:
Technical Note: 1C240.b. refers to porous metal formed by compacting and sintering the materials in 1C240.a. to form a metal material with fine pores interconnected throughout the structure. |
|
1C241 |
Rhenium, and alloys containing 90 % by weight or more rhenium; and alloys of rhenium and tungsten containing 90 % by weight or more of any combination of rhenium and tungsten, other than those specified in 1C226, having both of the following characteristics:
|
|
1C350 |
Chemicals, which may be used as precursors for toxic chemical agents, as follows, and "chemical mixtures" containing one or more thereof:
|
|
1C351 |
Human and animal pathogens and "toxins", as follows:
|
|
1C353 |
'Genetic elements' and 'genetically-modified organisms', as follows:
Technical Notes:
|
|
1C354 |
Plant pathogens, as follows:
|
|
1C450 |
Toxic chemicals and toxic chemical precursors, as follows, and "chemical mixtures" containing one or more thereof:
|
|
1C513 |
'High-entropy alloy' or ‘refractory metal and alloy’ powders, not specified in 1C002, having a surface modified with 'inoculants'.
Technical Notes: For the purposes of 1C513.:
|
1D Software
|
1D001 |
"Software" specially designed or modified for the "development", "production" or "use" of equipment specified in 1B001 to 1B003. |
|
1D002 |
"Software" for the "development" of organic "matrix", metal "matrix" or carbon "matrix" laminates or "composites". |
|
1D003 |
"Software" specially designed or modified to enable equipment to perform the functions of equipment specified in 1A004.c. or 1A004.d. |
|
1D101 |
"Software" specially designed or modified for the operation or maintenance of goods specified in 1B101, 1B102, 1B115, 1B117, 1B118 or 1B119. |
|
1D103 |
"Software" specially designed for analysis of reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures. |
|
1D201 |
"Software" specially designed for the "use" of goods specified in 1B201. |
1E Technology
|
1E001 |
"Technology" according to the General Technology Note for the "development" or "production" of equipment or materials specified in 1A002 to 1A005, 1A006.b., 1A007, 1B or 1C. |
|
1E002 |
Other "technology" as follows:
|
|
1E101 |
"Technology" according to the General Technology Note for the "use" of goods specified in 1A102, 1B001, 1B101, 1B102, 1B115 to 1B119, 1C001, 1C101, 1C107, 1C111 to 1C118, 1D101 or 1D103. |
|
1E102 |
"Technology" according to the General Technology Note for the "development" of "software" specified in 1D001, 1D101 or 1D103. |
|
1E103 |
"Technology" for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves, when used for the "production" of "composites" or partially processed "composites". |
|
1E104 |
"Technology" for the "production" of pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1 573 K (1 300 °C) to 3 173 K (2 900 °C) temperature range at pressures of 130 Pa to 20 kPa.
|
|
1E201 |
"Technology" according to the General Technology Note for the "use" of goods specified in 1A002, 1A007, 1A202, 1A225 to 1A227, 1B201, 1B225 to 1B235, 1C002.b.3. or .b.4., 1C010.b., 1C202, 1C210, 1C216, 1C225 to 1C241 or 1D201. |
|
1E202 |
"Technology" according to the General Technology Note for the "development" or "production" of goods specified in 1A007, 1A202 or 1A225 to 1A227. |
|
1E203 |
"Technology" according to the General Technology Note for the "development" of "software" specified in 1D201. |
PART IV
Category 2
CATEGORY 2 - MATERIALS PROCESSING
2A Systems, Equipment and Components
|
N.B. |
For quiet running bearings, see the Military Goods Controls. |
|
2A001 |
Anti-friction bearings, bearing systems and components, as follows:
|
|
2A101 |
Radial ball bearings, other than those specified in 2A001, having all tolerances specified in accordance with ISO 492 Tolerance Class 2 (or ANSI/ABMA Std 20 Tolerance Class ABEC-9 or other national equivalents), or better and having all of the following characteristics:
|
|
2A225 |
Crucibles made of materials resistant to liquid actinide metals, as follows:
|
|
2A226 |
Valves having all of the following characteristics:
Technical Note: For valves with different inlet and outlet diameters, the 'nominal size' in 2A226 refers to the smallest diameter. |
2B Test, Inspection and Production Equipment
Technical Notes:
|
1. |
For the purposes of 2B, secondary parallel contouring axes, (e.g., the w-axis on horizontal boring mills or a secondary rotary axis the centre line of which is parallel to the primary rotary axis) are not counted in the total number of contouring axes. Rotary axes need not rotate over 360°. A rotary axis can be driven by a linear device (e.g., a screw or a rack-and-pinion). |
|
2. |
For the purposes of 2B, the number of axes which can be co-ordinated simultaneously for "contouring control" is the number of axes along or around which, during processing of the workpiece, simultaneous and interrelated motions are performed between the workpiece and a tool. This does not include any additional axes along or around which other relative movement within the machine are performed such as:
|
|
3. |
For the purposes of 2B, axis nomenclature shall be in accordance with ISO 841:2001, Industrial automation systems and integration - Numerical control of machines - Coordinate system and motion nomenclature. |
|
4. |
For the purposes of 2B001 to 2B009, a "tilting spindle" is counted as a rotary axis. |
|
5. |
For the purposes of 2B, 'stated "unidirectional positioning repeatability"' may be used for each machine tool model as an alternative to individual machine tests and is determined as follows:
|
|
6. |
For the purposes of 2B001.a. to 2B001.c., measurement uncertainty for the "unidirectional positioning repeatability" of machine tools, as defined in the ISO 230-2:2014 or national equivalents, shall not be considered. |
|
7. |
For the purposes of 2B001.a. to 2B001.c., the measurement of axes shall be made according to test procedures in 5.3.2. of ISO 230-2:2014. Tests for axes longer than 2 meters shall be made over 2 m segments. Axes longer than 4 m require multiple tests (e.g., two tests for axes longer than 4 m and up to 8 m, three tests for axes longer than 8 m and up to 12 m), each over 2 m segments and distributed in equal intervals over the axis length. Test segments are equally spaced along the full axis length, with any excess length equally divided at the beginning, in between, and at the end of the test segments. The smallest "unidirectional positioning repeatability"-value of all test segments is to be reported. |
|
2B001 |
Machine tools and any combination thereof, for removing (or cutting) metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for "numerical control", as follows:
|
|
2B002 |
Numerically controlled optical finishing machine tools equipped for selective material removal to produce non-spherical optical surfaces having all of the following characteristics:
Technical Notes: For the purposes of 2B002:
|
|
2B003 |
"Numerically controlled" machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc=40 or more) spur, helical and double-helical gears having all of the following:
|
|
2B004 |
Hot "isostatic presses" having all of the following, and specially designed components and accessories therefor:
Technical Note: For the purposes of 2B004, the inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other.
|
|
2B005 |
Equipment specially designed for the deposition, processing and in-process control of inorganic overlays, coatings and surface modifications, as follows, for substrates specified in column 2, by processes shown in column 1 in the Table following 2E003.f., and specially designed automated handling, positioning, manipulation and control components therefor:
|
|
2B006 |
Dimensional inspection or measuring systems, equipment, position feedback units and "electronic assemblies", as follows:
|
|
2B007 |
"Robots" having any of the following characteristics and specially designed controllers and "end-effectors" therefor:
|
|
2B008 |
'Compound rotary tables' and "tilting spindles", specially designed for machine tools, as follows:
|
|
2B009 |
Spin-forming machines and flow-forming machines, which, according to the manufacturer's technical specification, can be equipped with "numerical control" units or a computer control and having all of the following:
Technical Note: For the purposes of 2B009, machines combining the function of spin-forming and flow-forming are regarded as flow-forming machines. |
|
2B104 |
"Isostatic presses", other than those specified in 2B004, having all of the following:
|
|
2B105 |
Chemical vapour deposition (CVD) furnaces, other than those specified in 2B005.a., designed or modified for the densification of carbon-carbon composites. |
|
2B109 |
Flow-forming machines, other than those specified in 2B009, usable in the "production" of propulsion components and equipment (e.g. motor cases and interstages) for "missiles", and specially designed components as follows:
Technical Note: Machines combining the function of spin-forming and flow-forming are for the purpose of 2B109 regarded as flow-forming machines. |
|
2B116 |
Vibration test systems, equipment and components therefor, as follows:
Technical Note: In 2B116, 'bare table' means a flat table, or surface, with no fixture or fittings. |
|
2B117 |
Equipment and process controls, other than those specified in 2B004, 2B005.a., 2B104 or 2B105, designed or modified for densification and pyrolysis of structural composite rocket nozzles and reentry vehicle nose tips. |
|
2B119 |
Balancing machines and related equipment, as follows:
|
|
2B120 |
Motion simulators or rate tables having all of the following characteristics:
|
|
2B121 |
Positioning tables (equipment capable of precise rotary positioning in any axes), other than those specified in 2B120, having all of the following characteristics:
|
|
2B122 |
Centrifuges capable of imparting accelerations greater than 100 g and designed or modified to incorporate slip rings or integrated non-contact devices capable of transferring electrical power, signal information, or both.
|
|
2B201 |
Machine tools and any combination thereof, other than those specified in 2B001, as follows, for removing or cutting metals, ceramics or "composites", which, according to the manufacturer’s technical specification, can be equipped with electronic devices for simultaneous "contouring control" in two or more axes:
Technical Note: Stated positioning accuracy levels derived under the following procedures from measurements made according to ISO 230-2:1988 (7) or national equivalents may be used for each machine tool model if provided to, and accepted by, national authorities instead of individual machine tests. Determination of stated positioning accuracy:
|
|
2B204 |
"Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:
Technical Note: In 2B204 the inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other. |
|
2B206 |
Dimensional inspection machines, instruments or systems, other than those specified in 2B006, as follows:
Technical Notes: All parameters of measurement values in 2B206 represent plus/minus i.e., not total band. |
|
2B207 |
"Robots", "end-effectors" and control units, other than those specified in 2B007, as follows:
|
|
2B209 |
Flow forming machines, spin forming machines capable of flow forming functions, other than those specified in 2B009 or 2B109, and mandrels, as follows:
|
|
2B219 |
Centrifugal multiplane balancing machines, fixed or portable, horizontal or vertical, as follows:
|
|
2B225 |
Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, having either of the following characteristics:
Technical Note: Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of 'master/slave' type or operated by joystick or keypad. |
|
2B226 |
Controlled atmosphere (vacuum or inert gas) induction furnaces, other than those specified in 9B001 and 3B001, and power supplies therefor, as follows:
|
|
2B227 |
Vacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment as follows:
|
|
2B228 |
Rotor fabrication or assembly equipment, rotor straightening equipment, bellows-forming mandrels and dies, as follows:
|
|
2B230 |
All types of 'pressure transducers' capable of measuring absolute pressures and having all of the following:
Technical Notes:
|
|
2B231 |
Vacuum pumps having all of the following characteristics:
Technical Notes:
|
|
2B232 |
High-velocity gun systems (propellant, gas, coil, electromagnetic, and electrothermal types, and other advanced systems) capable of accelerating projectiles to 1,5 km/s or greater.
|
|
2B233 |
Bellows-sealed scroll-type compressors and bellows-sealed scroll-type vacuum pumps having all of the following:
|
|
2B350 |
Chemical manufacturing facilities, equipment and components, as follows:
Technical Notes:
|
|
2B351 |
Toxic gas monitors and monitoring systems and their dedicated detecting components, other than those specified in 1A004, as follows; and detectors; sensor devices; and replaceable sensor cartridges therefor:
|
|
2B352 |
Biological manufacturing and handling equipment, as follows:
|
|
2B510 |
Additive manufacturing equipment, designed to produce metal or metal alloy components, having all of the following, and specially designed components therefor:
Technical Notes: For the purposes of 2B510:
|
2C Materials
None.
2D Software
|
2D001 |
"Software", other than that specified in 2D002, as follows:
|
|
2D002 |
"Software" for electronic devices, even when residing in an electronic device or system, enabling such devices or systems to function as a "numerical control" unit, capable of co-ordinating simultaneously more than four axes for "contouring control".
|
|
2D003 |
"Software", designed or modified for the operation of equipment specified in 2B002, that converts optical design, workpiece measurements and material removal functions into "numerical control" commands to achieve the desired workpiece form. |
|
2D101 |
"Software" specially designed or modified for the "use" of equipment specified in 2B104, 2B105, 2B109, 2B116, 2B117 or 2B119 to 2B122.
|
|
2D201 |
"Software" specially designed for the "use" of equipment specified in 2B204, 2B206, 2B207, 2B209, 2B219 or 2B227. |
|
2D202 |
"Software" specially designed or modified for the "development", "production" or "use" of equipment specified in 2B201.
|
|
2D351 |
"Software", other than that specified in 1D003, specially designed for "use" of equipment specified in 2B351. |
|
2D352 |
"Software" specially designed for nucleic acid assemblers and synthesisers specified in 2B352.i., that is capable of designing and building functional genetic elements from digital sequence data. |
2E Technology
|
2E001 |
"Technology" according to the General Technology Note for the "development" of equipment or "software" specified in 2A, 2B or 2D.
|
|
2E002 |
"Technology" according to the General Technology Note for the "production" of equipment specified in 2A or 2B. |
|
2E003 |
Other "technology", as follows:
|
|
2E101 |
"Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 2B004, 2B009, 2B104, 2B109, 2B116, 2B119 to 2B122 or 2D101. |
|
2E201 |
"Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 2A225, 2A226, 2B001, 2B006, 2B007.b., 2B007.c., 2B008, 2B009, 2B201, 2B204, 2B206, 2B207, 2B209, 2B225 to 2B233, 2D201 or 2D202. |
|
2E301 |
"Technology" according to the General Technology Note for the "use" of goods specified in 2B350 to 2B352. |
|
2E503 |
"technology", as follows:
|
Table
Deposition techniques
|
|
|
||||||
|
"Superalloys" |
Aluminides for internal passages |
||||||
|
|
Ceramics (19) and Low expansion glasses (14) |
Silicides Carbides Dielectric layers (15) Diamond Diamond-like carbon (17) |
||||||
|
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Silicides Carbides Refractory metals Mixtures thereof (4) Dielectric layers (15) Aluminides Alloyed aluminides (2) Boron nitride |
||||||
|
|
Cemented tungsten carbide (16), Silicon carbide (18) |
Carbides Tungsten Mixtures thereof (4) Dielectric layers (15) |
||||||
|
|
Molybdenum and Molybdenum alloys |
Dielectric layers (15) |
||||||
|
|
Beryllium and Beryllium alloys |
Dielectric layers (15) Diamond Diamond-like carbon (17) |
||||||
|
|
Sensor window materials (9) |
Dielectric layers (15) Diamond Diamond-like carbon (17) |
||||||
|
|
|
||||||
|
"Superalloys" |
Alloyed silicides Alloyed aluminides (2) MCrAlX (5) Modified zirconia (12) Silicides Aluminides Mixtures thereof (4) |
||||||
|
|
Ceramics (19) and Low expansion glasses (14) |
Dielectric layers (15) |
||||||
|
|
Corrosion resistant steel (7) |
MCrAlX (5) Modified zirconia (12) Mixtures thereof (4) |
||||||
|
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Silicides Carbides Refractory metals Mixtures thereof (4) Dielectric layers (15) Boron nitride |
||||||
|
|
Cemented tungsten carbide (16), Silicon carbide (18) |
Carbides Tungsten Mixtures thereof (4) Dielectric layers (15) |
||||||
|
|
Molybdenum and Molybdenum alloys |
Dielectric layers (15) |
||||||
|
|
Beryllium and Beryllium alloys |
Dielectric layers (15) Borides Beryllium |
||||||
|
|
Sensor window materials (9) |
Dielectric layers (15) |
||||||
|
|
Titanium alloys (13) |
Borides Nitrides |
||||||
|
Ceramics (19) and Low-expansion glasses |
Dielectric layers (15) Diamond-like carbon (17) |
||||||
|
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Dielectric layers (15) |
||||||
|
|
Cemented tungsten carbide (16), Silicon carbide |
Dielectric layers (15) |
||||||
|
|
Molybdenum and Molybdenum alloys |
Dielectric layers (15) |
||||||
|
|
Beryllium and Beryllium alloys |
Dielectric layers (15) |
||||||
|
|
Sensor window materials (9) |
Dielectric layers (15) Diamond-like carbon (17) |
||||||
|
Ceramics (19) and Low expansion glasses (14) |
Silicides Dielectric layers (15) Diamond-like carbon (17) |
||||||
|
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Dielectric layers (15) |
||||||
|
|
Cemented tungsten carbide (16), Silicon carbide |
Dielectric layers (15) |
||||||
|
|
Molybdenum and Molybdenum alloys |
Dielectric layers (15) |
||||||
|
|
Beryllium and Beryllium alloys |
Dielectric layers (15) |
||||||
|
|
Sensor window materials (9) |
Dielectric layers (15) Diamond-like carbon (17) |
||||||
|
"Superalloys" |
Alloyed silicides Alloyed aluminides (2) MCrAlX (5) |
||||||
|
|
Polymers (11) and Organic "matrix""composites" |
Borides Carbides Nitrides Diamond-like carbon (17) |
||||||
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Silicides Carbides Mixtures thereof (4) |
||||||
|
|
Titanium alloys (13) |
Silicides Aluminides Alloyed aluminides (2) |
||||||
|
|
‘Refractory metals and alloys’ (8) |
Silicides Oxides |
||||||
|
"Superalloys" |
MCrAlX (5) Modified zirconia (12) Mixtures thereof (4) Abradable Nickel-Graphite Abradable materials containing Ni-Cr-Al Abradable Al-Si-Polyester Alloyed aluminides (2) |
||||||
|
|
Aluminium alloys (6) |
MCrAlX (5) Modified zirconia (12) Silicides Mixtures thereof (4) |
||||||
|
|
’Refractory metals and alloys’ (8) |
Aluminides Silicides Carbides |
||||||
|
|
Corrosion resistant steel (7) |
MCrAlX (5) Modified zirconia (12) Mixtures thereof (4) |
||||||
|
|
Titanium alloys (13) |
Carbides Aluminides Silicides Alloyed aluminides (2) Abradable Nickel-Graphite Abradable materials containing Ni-Cr-Al Abradable Al-Si-Polyester |
||||||
|
‘Refractory metals and alloys’ (8) |
Fused silicides Fused aluminides except for resistance heating elements |
||||||
|
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Silicides Carbides Mixtures thereof (4) |
||||||
|
"Superalloys" |
Alloyed silicides Alloyed aluminides (2) Noble metal modified aluminides (3) MCrAlX (5) Modified zirconia (12) Platinum Mixtures thereof (4) |
||||||
|
|
Ceramics and Low- expansion glasses (14) |
Silicides Platinum Mixtures thereof (4) Dielectic layers (15) Diamond-like carbon (17) |
||||||
|
|
Titanium alloys (13) |
Borides Nitrides Oxides Silicides Aluminides Alloyed aluminides (2) Carbides |
||||||
|
|
Carbon-carbon, Ceramic and Metal "matrix""composites" |
Silicides Carbides Refractory metals Mixtures thereof (4) Dielectric layers (15) Boron nitride |
||||||
|
|
Cemented tungsten carbide (16), Silicon carbide (18) |
Carbides Tungsten Mixtures thereof (4) Dielectric layers (15) Boron nitride |
||||||
|
|
Molybdenum and Molybdenum alloys |
Dielectric layers (15) |
||||||
|
|
Beryllium and Beryllium alloys |
Borides Dielectric layers (15) Beryllium |
||||||
|
|
Sensor window materials (9) |
Dielectric layers (15) Diamond-like carbon (17) |
||||||
|
|
‘Refractory metals and alloys’ (8) |
Aluminides Silicides Oxides Carbides |
||||||
|
High temperature bearing steels |
Additions of Chromium Tantalum or Niobium (Columbium) |
||||||
|
|
Titanium alloys (13) |
Borides Nitrides |
||||||
|
|
Beryllium and Beryllium alloys |
Borides |
||||||
|
|
Cemented tungsten carbide (16) |
Carbides Nitrides |
TABLE - DEPOSITION TECHNIQUES - NOTES
|
1. |
The term 'coating process' includes coating repair and refurbishing as well as original coating. |
|
2. |
The term 'alloyed aluminide coating' includes single or multiple-step coatings in which an element or elements are deposited prior to or during application of the aluminide coating, even if these elements are deposited by another coating process. It does not, however, include the multiple use of single-step pack cementation processes to achieve alloyed aluminides. |
|
3. |
The term 'noble metal modified aluminide' coating includes multiple-step coatings in which the noble metal or noble metals are laid down by some other coating process prior to application of the aluminide coating. |
|
4. |
The term 'mixtures thereof' includes infiltrated material, graded compositions, co-deposits and multilayer deposits and are obtained by one or more of the coating processes specified in the Table. |
|
5. |
'MCrAlX' refers to a coating alloy where M equals cobalt, iron, nickel or combinations thereof and X equals hafnium, yttrium, silicon, tantalum in any amount or other intentional additions over 0,01 % by weight in various proportions and combinations, except:
|
|
6. |
The term 'aluminium alloys' refers to alloys having an ultimate tensile strength of 190 MPa or more measured at 293 K (20 °C). |
|
7. |
The term 'corrosion resistant steel' refers to AISI (American Iron and Steel Institute) 300 series or equivalent national standard steels. |
|
8. |
'Refractory metals and alloys' include the following metals and their alloys: niobium (columbium), molybdenum, tungsten and tantalum.. |
|
9. |
'Sensor window materials', as follows: alumina, silicon, germanium, zinc sulphide, zinc selenide, gallium arsenide, diamond, gallium phosphide, sapphire and the following metal halides: sensor window materials of more than 40 mm diameter for zirconium fluoride and hafnium fluoride. |
|
10. |
Category 2 does not include "technology" for single-step pack cementation of solid aerofoils. |
|
11. |
'Polymers', as follows: polyimide, polyester, polysulphide, polycarbonates and polyurethanes. |
|
12. |
'Modified zirconia' refers to additions of other metal oxides (e.g., calcia, magnesia, yttria, hafnia, rare earth oxides) to zirconia in order to stabilise certain crystallographic phases and phase compositions. Thermal barrier coatings made of zirconia, modified with calcia or magnesia by mixing or fusion, are not controlled. |
|
13. |
'Titanium alloys' refers only to aerospace alloys having an ultimate tensile strength of 900 MPa or more measured at 293 K (20 °C). |
|
14. |
'Low-expansion glasses' refers to glasses which have a coefficient of thermal expansion of 1 × 10-7 K-1 or less measured at 293 K (20 °C). |
|
15. |
'Dielectric layers' are coatings constructed of multi-layers of insulator materials in which the interference properties of a design composed of materials of various refractive indices are used to reflect, transmit or absorb various wavelength bands. Dielectric layers refers to more than four dielectric layers or dielectric/metal "composite" layers. |
|
16. |
'Cemented tungsten carbide' does not include cutting and forming tool materials consisting of tungsten carbide/(cobalt, nickel), titanium carbide/(cobalt, nickel), chromium carbide/nickel-chromium and chromium carbide/nickel. |
|
17. |
"Technology" for depositing diamond-like carbon on any of the following is not controlled:
magnetic disk drives and heads, equipment for the manufacture of disposables, valves for faucets, acoustic diaphragms for speakers, engine parts for automobiles, cutting tools, punching-pressing dies, office automation equipment, microphones or medical devices or moulds, for casting or moulding of plastics, manufactured from alloys containing less than 5 % beryllium. |
|
18. |
'Silicon carbide' does not include cutting and forming tool materials. |
|
19. |
Ceramic substrates, as used in this entry, does not include ceramic materials containing 5 % by weight, or greater, clay or cement content, either as separate constituents or in combination. |
TABLE - DEPOSITION TECHNIQUES - TECHNICAL NOTE
Processes specified in Column 1 of the Table are defined as follows:
|
a. |
Chemical Vapour Deposition (CVD) is an overlay coating or surface modification coating process wherein a metal, alloy, "composite", dielectric or ceramic is deposited upon a heated substrate. Gaseous reactants are decomposed or combined in the vicinity of a substrate resulting in the deposition of the desired elemental, alloy or compound material on the substrate. Energy for this decomposition or chemical reaction process may be provided by the heat of the substrate, a glow discharge plasma, or "laser" irradiation.
|
|
b. |
Thermal Evaporation-Physical Vapour Deposition (TE-PVD) is an overlay coating process conducted in a vacuum with a pressure less than 0,1 Pa wherein a source of thermal energy is used to vaporize the coating material. This process results in the condensation, or deposition, of the evaporated species onto appropriately positioned substrates. The addition of gases to the vacuum chamber during the coating process to synthesise compound coatings is an ordinary modification of the process. The use of ion or electron beams, or plasma, to activate or assist the coating's deposition is also a common modification in this technique. The use of monitors to provide in-process measurement of optical characteristics and thickness of coatings can be a feature of these processes. Specific TE-PVD processes are as follows:
|
|
c. |
Pack Cementation is a surface modification coating or overlay coating process wherein a substrate is immersed in a powder mixture (a pack), that consists of:
The substrate and powder mixture is contained within a retort which is heated to between 1 030 K (757 °C) and 1 375 K (1 102 °C) for sufficient time to deposit the coating. |
|
d. |
Plasma Spraying is an overlay coating process wherein a gun (spray torch) which produces and controls a plasma accepts powder or wire coating materials, melts them and propels them towards a substrate, whereon an integrally bonded coating is formed. Plasma spraying constitutes either low pressure plasma spraying or high velocity plasma spraying.
|
|
e. |
Slurry Deposition is a surface modification coating or overlay coating process wherein a metallic or ceramic powder with an organic binder is suspended in a liquid and is applied to a substrate by either spraying, dipping or painting, subsequent air or oven drying, and heat treatment to obtain the desired coating. |
|
f. |
Sputter Deposition is an overlay coating process based on a momentum transfer phenomenon, wherein positive ions are accelerated by an electric field towards the surface of a target (coating material). The kinetic energy of the impacting ions is sufficient to cause target surface atoms to be released and deposited on an appropriately positioned substrate.
|
|
g. |
Ion Implantation is a surface modification coating process in which the element to be alloyed is ionised, accelerated through a potential gradient and implanted into the surface region of the substrate. This includes processes in which ion implantation is performed simultaneously with electron beam physical vapour deposition or sputter deposition. |
PART V
Category 3
CATEGORY 3 - ELECTRONICS
3A Systems, Equipment and Components
|
Note 1: |
The control status of equipment and components described in 3A001, 3A002 or 3A501, other than those described in 3A001.a.3. to 3A001.a.10., 3A001.a.12. to 3A001.a.14., 3A001.b.12. or 3A501.a.15. which are specially designed for or which have the same functional characteristics as other equipment is determined by the control status of the other equipment. |
|
Note 2: |
The control status of integrated circuits described in 3A001.a.3. to 3A001.a.9., or 3A001.a.12. to 3A001.a.14., which are unalterably programmed or designed for a specific function for another equipment is determined by the control status of the other equipment.
|
|
Note 3: |
The status of wafers (finished or unfinished), in which the function has been determined, is to be evaluated against the parameters of 3A001.a., 3A001.b., 3A001.d., 3A001.e.4., 3A001.g., 3A001.h., or 3A001.i. |
|
3A001 |
Electronic items as follows:
|
|
3A002 |
General purpose "electronic assemblies", modules and equipment, as follows:
|
|
3A003 |
Spray cooling thermal management systems employing closed loop fluid handling and reconditioning equipment in a sealed enclosure where a dielectric fluid is sprayed onto electronic components using specially designed spray nozzles that are designed to maintain electronic components within their operating temperature range, and specially designed components therefor. |
|
3A101 |
Electronic equipment, devices and components, other than those specified in 3A001, as follows:
|
|
3A102 |
'Thermal batteries' designed or modified for 'missiles'.
Technical Notes:
|
|
3A201 |
Electronic components, other than those specified in 3A001, as follows;
|
|
3A225 |
Frequency changers or generators, other than those specified in 0B001.b.13., usable as a variable or fixed frequency motor drive, having all of the following characteristics:
Technical Notes:
|
|
3A226 |
High-power direct current power supplies, other than those specified in 0B001.j.6., having both of the following characteristics:
|
|
3A227 |
High-voltage direct current power supplies, other than those specified in 0B001.j.5., having both of the following characteristics:
|
|
3A228 |
Switching devices, as follows:
|
|
3A229 |
High-current pulse generators as follows:
|
|
3A230 |
High-speed pulse generators, and 'pulse heads' therefor, having both of the following characteristics:
Technical Notes:
|
|
3A231 |
Neutron generator systems, including tubes, having both of the following characteristics:
|
|
3A232 |
Multipoint initiation systems, other than those specified in 1A007, as follows:
|
|
3A233 |
Mass spectrometers, other than those specified in 0B002.g., capable of measuring ions of 230 u or greater and having a resolution of better than 2 parts in 230, as follows, and ion sources therefor:
Technical Notes:
|
|
3A234 |
Striplines to provide low inductance path to detonators with the following characteristics:
|
|
3A501 |
Electronic items as follows:
|
|
3A502 |
General purpose "electronic assemblies", modules and equipment, as follows:
|
|
3A504 |
Cryogenic cooling systems and components, as follows:
|
3B Test, Inspection and Production Equipment
|
3B001 |
Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
|
|
3B002 |
Test equipment specially designed for testing finished or unfinished semiconductor devices as follows and specially designed components and accessories therefor:
|
|
3B501 |
Equipment for the manufacturing of semiconductor devices or materials, as follows and specially designed components and accessories therefor:
|
|
3B503 |
Scanning Electron Microscope (SEM) equipment designed for imaging semiconductor devices or integrated circuits, having all of the following:
|
|
3B504 |
Cryogenic wafer probing equipment, having all of the following:
|
3C Materials
|
3C001 |
Hetero-epitaxial materials, not specified in 3C507, consisting of a "substrate" having stacked epitaxially grown multiple layers of any of the following:
|
|
3C002 |
Resist materials as follows and "substrates" coated with the following resists:
|
|
3C003 |
Organo-inorganic compounds as follows:
|
|
3C004 |
Hydrides of phosphorus, arsenic or antimony, having a purity greater (better) than 99,999 %, even diluted in inert gases or hydrogen.
|
|
3C005 |
High resistivity materials as follows:
|
|
3C006 |
Materials, not specified in 3C001, consisting of a "substrate" specified in 3C005 with at least one epitaxial layer of silicon carbide (SiC), gallium nitride (GaN), aluminium nitride (AlN), aluminium gallium nitride (AlGaN), gallium oxide (Ga2O3) or diamond. |
|
3C507 |
Epitaxial materials consisting of a "substrate" having at least one epitaxially grown layer of any of the following:
|
|
3C508 |
Fluorides, hydrides, or chlorides, of silicon or germanium, containing any of the following:
|
|
3C509 |
Silicon, silicon oxides, germanium or germanium oxides, containing any of the following:
|
3D Software
|
3D001 |
"Software" specially designed for the "development" or "production" of equipment specified in 3A001.b. to 3A002.h., 3A501.b.13. or 3B. |
|
3D002 |
"Software" specially designed for the "use" of equipment specified in 3B001.a. to 3B001.f., 3B002, 3A225, 3B501.a.4., 3B501.f.1., 3B501.k. or 3B501.n. |
|
3D003 |
'Computational lithography' "software" specially designed for the "development" of patterns on EUV-lithography masks or reticles.
Technical Note: For the purposes of 3D003, 'computational lithography' is the use of computer modelling to predict, correct, optimise and verify imaging performance of the lithography process over a range of patterns, processes, and system conditions. |
|
3D004 |
"Software" specially designed for the "development" of equipment specified in 3A003. |
|
3D005 |
"Software" specially designed to restore normal operation of a microcomputer, "microprocessor microcircuit" or "microcomputer microcircuit" within 1 ms after an Electromagnetic Pulse (EMP) or Electrostatic Discharge (ESD) disruption, without loss of continuation of operation. |
|
3D006 |
'Electronic Computer-Aided Design' ('ECAD') "software" specially designed for the "development" of integrated circuits having any "Gate-All-Around Field-Effect Transistor" ("GAAFET") structure, and having any of the following:
Technical Notes: For the purposes of 3D006:
|
|
3D101 |
"Software" specially designed or modified for the "use" of equipment specified in 3A101.b. |
|
3D225 |
"Software" specially designed to enhance or release the performance of frequency changers or generators to meet the characteristics of 3A225. |
|
3D507 |
"Software" designed to extract 'GDSII' or equivalent standard layout data and perform layer-to-layer alignment from Scanning Electron Microscope (SEM) images, and generate multi-layer 'GDSII' data or the circuit netlist.
Technical Note: For the purposes of 3D507, 'GDSII' ('Graphic Design System II') is a database file format for data exchange of integrated circuit artwork or integrated circuit layout artwork. |
3E Technology
|
3E001 |
"Technology" according to the General Technology Note for the "development" or "production" of equipment or materials specified in 3A, 3B or 3C.
|
|
3E002 |
"Technology" according to the General Technology Note, other than that specified in 3E001, for the "development" or "production" of a "microprocessor microcircuit", "microcomputer microcircuit" or microcontroller microcircuit core, having an arithmetic logic unit with an access width of 32 bits or more and any of the following features or characteristics:
|
|
3E003 |
Other "technology" for the "development" or "production" of the following:
|
|
3E004 |
"Technology""required" for the slicing, grinding and polishing of 300 mm diameter silicon wafers to achieve a 'Site Front least sQuares Range' ('SFQR') less than or equal to 20 nm at any site of 26 mm × 8 mm on the front surface of the wafer and an edge exclusion less than or equal to 2 mm.
Technical Note: For the purposes of 3E004 'SFQR' is the range of maximum deviation and minimum deviation from front reference plane, calculated by least square method with all front surface data including site boundary within a site. |
|
3E101 |
"Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 3A001.a.1. or 2., 3A101, 3A102 or 3D101. |
|
3E102 |
"Technology" according to the General Technology Note for the "development" of "software" specified in 3D101. |
|
3E201 |
"Technology" according to the General Technology Note for the "use" of equipment specified in 3A001.e.2., 3A001.e.3., 3A001.g., 3A201, 3A225 to 3A234. |
|
3E225 |
"Technology", in the form of codes or keys, to enhance or release the performance of frequency changers or generators to meet the characteristics of 3A225. |
|
3E505 |
"Technology" according to the General Technology Note for the "development" or "production" of integrated circuits or devices, using "Gate-All-Around Field-Effect Transistor" ("GAAFET") structures.
Note 3: 3E505 does not apply to 'Process Design Kits' ('PDKs') unless they include libraries implementing functions or technologies for items specified in 3A001 or 3A501. Technical Notes:
|
PART VI
Category 4
CATEGORY 4 - COMPUTERS
|
Note 1: |
Computers, related equipment and "software" performing telecommunications or "local area network" functions must also be evaluated against the performance characteristics of Category 5, Part 1 (Telecommunications). |
|
Note 2: |
Control units which directly interconnect the buses or channels of central processing units, 'main storage' or disk controllers are not regarded as telecommunications equipment described in Category 5, Part 1 (Telecommunications).
Technical Note: For the purposes of Note 2, 'main storage' is the primary storage for data or instructions for rapid access by a central processing unit. It consists of the internal storage of a "digital computer" and any hierarchical extension thereto, such as cache storage or non-sequentially accessed extended storage. |
4A Systems, Equipment and Components
|
4A001 |
Electronic computers and related equipment, having any of the following and "electronic assemblies" and specially designed components therefor:
|
|
4A003 |
"Digital computers", "electronic assemblies", and related equipment therefor, as follows and specially designed components therefor:
|
|
4A004 |
Computers as follows and specially designed related equipment, "electronic assemblies" and components therefor:
Technical Notes:
|
|
4A005 |
Systems, equipment, and components therefor, specially designed or modified for the generation, command and control, or delivery of "intrusion software". |
|
4A101 |
Analogue computers, "digital computers" or digital differential analysers, other than those specified in 4A001.a.1., which are ruggedized and designed or modified for use in space launch vehicles specified in 9A004 or sounding rockets specified in 9A104. |
|
4A102 |
Hybrid computers specially designed for modelling, simulation or design integration of space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
|
|
4A506 |
Quantum computers and related "electronic assemblies" and components therefor, as follows:
Technical Notes: For the purposes of 4A506:
|
|
4A507 |
Computers, "electronic assemblies", and components containing one or more integrated circuits, specified by 3A501.a.16.
Note: 4A507 includes "digital computers" and hybrid computers. |
4B Test, Inspection and Production Equipment
None.
4C Materials
None.
4D Software
|
Note: |
The control status of "software" for equipment described in other Categories is dealt with in the appropriate Category. |
|
4D001 |
"Software" as follows:
|
|
4D002 |
Not used. |
|
4D003 |
Not used. |
|
4D004 |
"Software" specially designed or modified for the generation, command and control, or delivery of "intrusion software".
|
4E Technology
|
4E001 |
"Technology" as follows:
|
TECHNICAL NOTE ON "ADJUSTED PEAK PERFORMANCE" ("APP")
"APP" is an adjusted peak rate at which "digital computers" perform 64-bit or larger floating point additions and multiplications.
"APP" is expressed in Weighted TeraFLOPS (WT), in units of 1012 adjusted floating point operations per second.
Abbreviations used in this Technical Note
|
n |
number of processors in the "digital computer" |
|
i |
processor number (i,...n) |
|
ti |
processor cycle time (ti = 1/Fi) |
|
Fi |
processor frequency |
|
Ri |
peak floating point calculating rate |
|
Wi |
architecture adjustment factor |
Outline of "APP" calculation method
|
1. |
For each processor i, determine the peak number of 64-bit or larger floating point operations, FPOi, performed per cycle for each processor in the "digital computer".
|
|
2. |
Calculate the floating point rate R for each processor Ri = FPOi/ti. |
|
3. |
Calculate "APP" as "APP" = W1 × R1 + W2 × R2 + … + Wn × Rn. |
|
4. |
For 'vector processors', Wi = 0,9. For non-'vector processors', Wi = 0,3. |
|
Note 1: |
For processors that perform compound operations in a cycle, such as addition and multiplication, each operation is counted. |
|
Note 2: |
For a pipelined processor the effective calculating rate R is the faster of the pipelined rate, once the pipeline is full, or the non-pipelined rate. |
|
Note 3: |
The calculating rate R of each contributing processor is to be calculated at its maximum value theoretically possible before the "APP" of the combination is derived. Simultaneous operations are assumed to exist when the computer manufacturer claims concurrent, parallel, or simultaneous operation or execution in a manual or brochure for the computer. |
|
Note 4: |
Do not include processors that are limited to input/output and peripheral functions (e.g., disk drive, communication and video display) when calculating "APP". |
|
Note 5: |
"APP" values are not to be calculated for processor combinations (inter)connected by "Local Area Networks", Wide Area Networks, I/O shared connections/devices, I/O controllers and any communication interconnection implemented by "software". |
|
Note 6: |
"APP" values must be calculated for processor combinations containing processors specially designed to enhance performance by aggregation, operating simultaneously and sharing memory.
Technical Notes:
|
|
Note 7: |
A 'vector processor' is defined as a processor with built-in instructions that perform multiple calculations on floating-point vectors (one-dimensional arrays of 64-bit or larger numbers) simultaneously, having at least 2 vector functional units and at least 8 vector registers of at least 64 elements each. |
PART VII
Category 5
CATEGORY 5 - TELECOMMUNICATIONS AND "INFORMATION SECURITY"
Part 1 - TELECOMMUNICATIONS
|
Note 1: |
The control status of components, test and "production" equipment and "software" therefor which are specially designed for telecommunications equipment or systems is determined in Category 5, Part 1.
|
|
Note 2: |
"Digital computers", related equipment or "software", when essential for the operation and support of telecommunications equipment described in this Category, are regarded as specially designed components, provided they are the standard models customarily supplied by the manufacturer. This includes operation, administration, maintenance, engineering or billing computer systems. |
5A1 Systems, Equipment and Components
|
5A001 |
Telecommunications systems, equipment, components and accessories as follows:
|
|
5A101 |
Telemetry and telecontrol equipment, including ground equipment, designed or modified for 'missiles'.
Technical Note: In 5A101 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
|
5B1 Test, Inspection and Production Equipment
|
5B001 |
Telecommunications test, inspection and production equipment, components and accessories, as follows:
|
5C1 Materials
None
5D1 Software
|
5D001 |
"Software" as follows:
|
|
5D101 |
"Software" specially designed or modified for the "use" of equipment specified in 5A101. |
5E1 Technology
|
5E001 |
"Technology" as follows:
|
|
5E101 |
"Technology" according to the General Technology Note for the "development", "production" or "use" of equipment specified in 5A101. |
Part 2 - "INFORMATION SECURITY"
|
Note 1: |
Not used. |
|
Note 2: |
Category 5, Part 2 does not control products when accompanying their user for the user's personal use. |
|
Note 3: |
Cryptography Note
5A002, 5D002.a.1., 5D002.b. and 5D002.c.1. do not control items as follows:
|
5A2 Systems, Equipment and Components
|
5A002 |
"Information security" systems, equipment and components, as follows:
|
|
5A003 |
Systems, equipment and components, for non-cryptographic "information security", as follows:
|
|
5A004 |
Systems, equipment and components for defeating, weakening or bypassing "information security", as follows:
|
5B2 Test, Inspection and Production Equipment
|
5B002 |
"Information security" test, inspection and "production" equipment, as follows:
|
5C2 Materials
None.
5D2 Software
|
5D002 |
"Software" as follows:
|
5E2 Technology
|
5E002 |
"Technology" as follows:
|
PART VIII
Category 6
CATEGORY 6 - SENSORS AND LASERS
6A Systems, Equipment and Components
|
6A001 |
Acoustic systems, equipment and components, as follows:
|
|
6A002 |
Optical sensors or equipment and components therefor, as follows:
|
|
6A003 |
Cameras, systems or equipment, and components therefor, as follows:
|
|
6A004 |
Optical equipment and components, as follows:
|
|
6A005 |
"Lasers", other than those specified in 0B001.g.5. or 0B001.h.6., components and optical equipment, as follows:
|
|
6A006 |
"Magnetometers", "magnetic gradiometers", "intrinsic magnetic gradiometers", underwater electric field sensors, "compensation systems", and specially designed components therefor, as follows:
Technical Note: For the purposes of 6A006, 'sensitivity' (noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured. |
|
6A007 |
Gravity meters (gravimeters) and gravity gradiometers, as follows:
|
|
6A008 |
Radar systems, equipment and assemblies, having any of the following, and specially designed components therefor:
Technical Notes: For the purposes of 6A008:
|
|
6A102 |
Radiation hardened 'detectors', other than those specified in 6A002, specially designed or modified for protecting against nuclear effects (e.g. electromagnetic pulse (EMP), X-rays, combined blast and thermal effects) and usable for "missiles", designed or rated to withstand radiation levels which meet or exceed a total irradiation dose of 5 × 105 rads (silicon).
Technical Note: In 6A102, a 'detector' is defined as a mechanical, electrical, optical or chemical device that automatically identifies and records, or registers a stimulus such as an environmental change in pressure or temperature, an electrical or electromagnetic signal or radiation from a radioactive material. This includes devices that sense by one time operation or failure. |
|
6A107 |
Gravity meters (gravimeters) and components for gravity meters and gravity gradiometers, as follows:
|
|
6A108 |
Radar systems, tracking systems and radomes, other than those specified in entry 6A008, as follows:
|
|
6A202 |
Photomultiplier tubes having both of the following characteristics:
|
|
6A203 |
Cameras and components, other than those specified in 6A003, as follows:
|
|
6A205 |
"Lasers", "laser" amplifiers and oscillators, other than those specified in 0B001.g.5., 0B001.h.6. and 6A005, as follows:
|
|
6A225 |
Velocity interferometers for measuring velocities exceeding 1 km/s during time intervals of less than 10 microseconds.
|
|
6A226 |
Pressure sensors, as follows:
|
6B Test, Inspection and Production Equipment
|
6B002 |
Masks and reticles, specially designed for optical sensors specified in 6A002.a.1.b. or 6A002.a.1.d. |
|
6B004 |
Optical equipment as follows:
|
|
6B007 |
Equipment to produce, align and calibrate land-based gravity meters with a static "accuracy" of less (better) than 0,1 mGal. |
|
6B008 |
Pulse radar cross-section measurement systems having transmit pulse widths of 100 ns or less, and specially designed components therefor.
|
|
6B108 |
Systems, other than those specified in 6B008, specially designed for radar cross section measurement usable for 'missiles' and their subsystems.
Technical Note: In 6B108 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
6C Materials
|
6C002 |
Optical sensor materials as follows:
|
|
6C004 |
Optical materials as follows:
|
|
6C005 |
"Laser" materials as follows:
|
6D Software
|
6D001 |
"Software" specially designed for the "development" or "production" of equipment specified in 6A004, 6A005, 6A008 or 6B008. |
|
6D002 |
"Software" specially designed for the "use" of equipment specified in 6A002.b., 6A008 or 6B008. |
|
6D003 |
Other "software" as follows:
|
|
6D102 |
"Software" specially designed or modified for the "use" of goods specified in 6A108. |
|
6D103 |
"Software" which processes post-flight, recorded data, enabling determination of vehicle position throughout its flight path, specially designed or modified for 'missiles'.
Technical Note: In 6D103 'missiles' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
6D203 |
"Software" specially designed to enhance or release the performance of cameras or imaging devices to meet the characteristics of 6A203.a. to 6A203.c. |
6E Technology
|
6E001 |
"Technology" according to the General Technology Note for the "development" of equipment, materials or "software" specified in 6A, 6B, 6C or 6D. |
|
6E002 |
"Technology" according to the General Technology Note for the "production" of equipment or materials specified in 6A, 6B or 6C. |
|
6E003 |
Other "technology" as follows:
|
|
6E101 |
"Technology" according to the General Technology Note for the "use" of equipment or "software" specified in 6A002, 6A007.b. and .c., 6A008, 6A102, 6A107, 6A108, 6B108, 6D102 or 6D103.
|
|
6E201 |
"Technology" according to the General Technology Note for the "use" of equipment specified in 6A003, 6A005.a.2., 6A005.b.2., 6A005.b.3., 6A005.b.4., 6A005.b.6., 6A005.c.2., 6A005.d.3.c., 6A005.d.4.c., 6A202, 6A203, 6A205, 6A225 or 6A226.
|
|
6E203 |
"Technology", in the form of codes or keys, to enhance or release the performance of cameras or imaging devices to meet the characteristics of 6A203.a. to 6A203.c. |
PART IX
Category 7
CATEGORY 7 - NAVIGATION AND AVIONICS
7A Systems, Equipment and Components
|
N.B. |
For automatic pilots for submersible vehicles, see Category 8. |
For radar, see Category 6.
|
7A001 |
Accelerometers as follows and specially designed components therefor:
|
|
7A002 |
Gyros or angular rate sensors, having any of the following and specially designed components therefor:
|
|
7A003 |
'Inertial measurement equipment or systems', having any of the following:
Technical Notes: For the purposes of 7A003:
|
|
7A004 |
'Star trackers' and components therefor, as follows:
Technical Note: For the purposes of 7A004.a., 'star trackers' are also referred to as stellar attitude sensors or gyro-astro compasses. |
|
7A005 |
"Satellite navigation system" receiving equipment having any of the following and specially designed components therefor:
|
|
7A006 |
Airborne altimeters operating at frequencies other than 4,2 to 4,4 GHz inclusive and having any of the following:
|
|
7A008 |
Underwater sonar navigation systems using doppler velocity or correlation velocity logs integrated with a heading source and having a positioning "accuracy" of equal to or less (better) than 3 % of distance travelled "Circular Error Probable" ("CEP") and specially designed components therefor.
For other marine systems, see 8A002. |
|
7A101 |
Linear accelerometers, other than those specified in 7A001, designed for use in inertial navigation systems or in guidance systems of all types, usable in 'missiles', having all of the following characteristics, and specially designed components therefor:
Technical Notes:
|
|
7A102 |
All types of gyros, other than those specified in 7A002, usable in 'missiles', with a rated "drift rate" 'stability' of less than 0,5° (1 sigma or rms) per hour in a 1 g environment and specially designed components therefor.
Technical Notes:
|
|
7A103 |
Instrumentation, navigation equipment and systems, other than those specified in 7A003, as follows; and specially designed components therefor:
Technical Note: In 7A103 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
7A104 |
Gyro-astro compasses and other devices, other than those specified in 7A004, which derive position or orientation by means of automatically tracking celestial bodies or satellites and specially designed components therefor. |
|
7A105 |
Receiving equipment for navigation satellite systems, other than those specified in 7A005, having any of the following characteristics, and specially designed components therefor:
Notes:
|
|
7A106 |
Altimeters, other than those specified in 7A006, of radar or laser radar type, designed or modified for use in space launch vehicles specified in 9A004 or sounding rockets specified in 9A104. |
|
7A115 |
Passive sensors for determining bearing to specific electromagnetic source (direction finding equipment) or terrain characteristics, designed or modified for use in space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
|
|
7A116 |
Flight control systems and servo valves, as follows; designed or modified for use in space launch vehicles specified in 9A004, sounding rockets specified in 9A104 or "missiles".
|
|
7A117 |
"Guidance sets", usable in "missiles" capable of achieving system accuracy of 3,33 % or less of the range (e.g., a 'CEP' of 10 km or less at a range of 300 km).
Technical Note: In 7A117 'CEP' (Circular Error Probable or Circle of Equal Probability) is a measure of accuracy, defined as the radius of the circle centred at the target, at a specific range, in which 50 % of the payloads impact. |
7B Test, Inspection and Production Equipment
|
7B001 |
Test, calibration or alignment equipment, specially designed for equipment specified in 7A.
|
|
7B002 |
Equipment specially designed to characterize mirrors for ring "laser" gyros, as follows:
|
|
7B003 |
Equipment specially designed for the "production" of equipment specified in 7A.
|
|
7B102 |
Reflectometers specially designed to characterise mirrors, for "laser" gyros, having a measurement accuracy of 50 ppm or less (better). |
|
7B103 |
"Production facilities" and "production equipment" as follows:
|
7C Materials
None.
7D Software
|
7D001 |
"Software" specially designed or modified for the "development" or "production" of equipment specified in 7A or 7B. |
|
7D002 |
"Source code" for the operation or maintenance of any inertial navigation equipment, including inertial equipment not specified in 7A003 or 7A004, or Attitude and Heading Reference Systems ('AHRS').
Technical Note: For the purposes of 7D002, 'AHRS' generally differ from Inertial Navigation Systems (INS) in that an 'AHRS' provides attitude and heading information and normally does not provide the acceleration, velocity and position information associated with an INS. |
|
7D003 |
Other "software" as follows:
|
|
7D004 |
"Source code" incorporating "development""technology" specified in 7E004.a.2., 7E004.a.3., 7E004.a.5., 7E004.a.6. or 7E004.b., for any of the following:
|
|
7D005 |
"Software" specially designed to decrypt "satellite navigation system" ranging code designed for government use. |
|
7D101 |
"Software" specially designed or modified for the "use" of equipment specified in 7A001 to 7A006, 7A101 to 7A106, 7A115, 7A116.a., 7A116.b., 7B001, 7B002, 7B003, 7B102 or 7B103. |
|
7D102 |
Integration "software" as follows:
|
|
7D103 |
"Software" specially designed for modelling or simulation of the "guidance sets" specified in 7A117 or for their design integration with the space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
|
|
7D104 |
"Software" specially designed or modified for the operation or maintenance of "guidance sets" specified in 7A117.
|
7E Technology
|
7E001 |
"Technology" according to the General Technology Note for the "development" of equipment or "software", specified in 7A, 7B, 7D001, 7D002, 7D003, 7D005 and 7D101 to 7D103.
|
|
7E002 |
"Technology" according to the General Technology Note for the "production" of equipment specified in 7A or 7B. |
|
7E003 |
"Technology" according to the General Technology Note for the repair, refurbishing or overhaul of equipment specified in 7A001 to 7A004.
|
|
7E004 |
Other "technology" as follows:
|
|
7E101 |
"Technology" according to the General Technology Note for the "use" of equipment specified in 7A001 to 7A006, 7A101 to 7A106, 7A115 to 7A117, 7B001, 7B002, 7B003, 7B102, 7B103, 7D101 to 7D103. |
|
7E102 |
"Technology" for protection of avionics and electrical subsystems against electromagnetic pulse (EMP) and electromagnetic interference (EMI) hazards, from external sources, as follows:
|
|
7E104 |
"Technology" for the integration of the flight control, guidance, and propulsion data into a flight management system for optimisation of rocket system trajectory. |
PART X
Category 8
CATEGORY 8 - MARINE
8A Systems, Equipment and Components
|
8A001 |
Submersible vehicles and surface vessels, as follows:
|
|
8A002 |
Marine systems, equipment and components, as follows:
|
8B Test, Inspection and Production Equipment
|
8B001 |
Water tunnels designed to have a background noise of less than 100 dB (reference 1 μPa, 1 Hz) within the frequency range exceeding 0 Hz but not exceeding 500 Hz and designed for measuring acoustic fields generated by a hydro-flow around propulsion system models. |
8C Materials
|
8C001 |
'Syntactic foam' designed for underwater use and having all of the following:
Technical Note: For the purposes of 8C001, 'syntactic foam' consists of hollow spheres of plastic or glass embedded in a resin "matrix". |
8D Software
|
8D001 |
"Software" specially designed or modified for the "development", "production" or "use" of equipment or materials, specified in 8A, 8B or 8C. |
|
8D002 |
Specific "software" specially designed or modified for the "development", "production", repair, overhaul or refurbishing (re-machining) of propellers specially designed for underwater noise reduction. |
8E Technology
|
8E001 |
"Technology" according to the General Technology Note for the "development" or "production" of equipment or materials, specified in 8A, 8B or 8C. |
|
8E002 |
Other "technology" as follows:
|
PART XI
Category 9
CATEGORY 9 – AEROSPACE AND PROPULSION
9A Systems, Equipment and Components
|
N.B. |
For propulsion systems designed or rated against neutron or transient ionising radiation, SEE THE MILITARY GOODS CONTROLS. |
|
9A001 |
Aero gas turbine engines having any of the following:
|
|
9A002 |
'Marine gas turbine engines' designed to use liquid fuel and having all of the following, and specially designed assemblies and components therefor:
Technical Note: For the purposes of 9A002, 'corrected specific fuel consumption' is the specific fuel consumption of the engine corrected to a marine distillate liquid fuel having a net specific energy (i.e. net heating value) of 42MJ/kg (ISO 3977-2:1997). |
|
9A003 |
Specially designed assemblies or components, incorporating any of the "technologies" specified in 9E003.a., 9E003.h. 9E003.i., or 9E003.k, for any of the following aero gas turbine engines:
|
|
9A004 |
Space launch vehicles, "spacecraft", "spacecraft buses", "spacecraft mission equipment", "spacecraft" on-board systems or equipment, terrestrial equipment, air-launch platforms and "sub-orbital craft" as follows:
|
|
9A005 |
Liquid rocket propulsion systems containing any of the systems or components, specified in 9A006.
|
|
9A006 |
Systems and components, specially designed for liquid rocket propulsion systems, as follows:
|
|
9A007 |
Solid rocket propulsion systems having any of the following:
|
|
9A008 |
Components specially designed for solid rocket propulsion systems, as follows:
|
|
9A009 |
Hybrid rocket propulsion systems having any of the following:
|
|
9A010 |
Specially designed components, systems and structures, for launch vehicles, launch vehicle propulsion systems or "spacecraft", as follows:
|
|
9A011 |
Ramjet, scramjet or 'combined cycle engines', and specially designed components therefor.
Technical Note: For the purposes of 9A011, 'combined cycle engines' combine two or more of the following types of engines:
|
|
9A012 |
"Unmanned aerial vehicles" ("UAVs"), unmanned "airships", related equipment and components, as follows:
|
|
9A101 |
Turbojet and turbofan engines, other than those specified in 9A001, as follows;
|
|
9A102 |
'Turboprop engine systems' specially designed for unmanned aerial vehicles specified in 9A012 or 9A112.a., and specially designed components therefor, having a 'maximum power' greater than 10 kW.
Technical Notes:
|
|
9A104 |
Sounding rockets, capable of a range of at least 300 km.
|
|
9A105 |
Liquid propellant rocket engines or gel propellant rocket motors, as follows:
|
|
9A106 |
Systems or components, other than those specified in 9A006 as follows, specially designed for liquid rocket propulsion or gel propellant rocket systems:
|
|
9A107 |
Solid propellant rocket motors, usable in complete rocket systems or unmanned aerial vehicles, capable of a range of 300 km, other than those specified in 9A007, having total impulse capacity equal to or greater than 0,841 MNs.
|
|
9A108 |
Components, other than those specified in 9A008, as follows, specially designed for solid and hybrid rocket propulsion systems:
|
|
9A109 |
Hybrid rocket motors and specially designed components as follows:
|
|
9A110 |
Composite structures, laminates and manufactures thereof, other than those specified in 9A010, specially designed for use in 'missiles' or the subsystems specified in 9A005, 9A007, 9A105, 9A106.c., 9A107, 9A108.c., 9A116 or 9A119.
Technical Note: In 9A110 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
9A111 |
Pulse jet or detonation engines, usable in "missiles" or unmanned aerial vehicles specified in 9A012 or 9A112.a., and specially designed components therefor.
Technical Note: In 9A111 detonation engines utilise detonation to produce a rise in effective pressure across the combustion chamber. Examples of detonation engines include pulse detonation engines, rotating detonation engines or continuous wave detonation engines. |
|
9A112 |
"Unmanned aerial vehicles" ("UAVs"), other than those specified in 9A012, as follows:
|
|
9A115 |
Launch support equipment as follows:
|
|
9A116 |
Reentry vehicles, usable in "missiles", and equipment designed or modified therefor, as follows:
|
|
9A117 |
Staging mechanisms, separation mechanisms, and interstages, usable in "missiles".
N.B. SEE ALSO 9A121. |
|
9A118 |
Devices to regulate combustion usable in engines, which are usable in "missiles" or unmanned aerial vehicles specified in 9A012 or 9A112.a., specified in 9A011 or 9A111. |
|
9A119 |
Individual rocket stages, usable in complete rocket systems or unmanned aerial vehicles, capable of a range of 300 km, other than those specified in 9A005, 9A007, 9A009, 9A105, 9A107 and 9A109. |
|
9A120 |
Liquid or gel propellant tanks, other than those specified in 9A006, specially designed for propellants specified in 1C111 or 'other liquid or gel propellants' used in rocket systems capable of delivering at least a 500 kg payload to a range of at least 300 km.
|
|
9A121 |
Umbilical and interstage electrical connectors specially designed for "missiles", space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
Note: In 9A121, interstage electrical connectors also include electrical connectors installed between the "missile", space launch vehicle or sounding rocket and their payload. |
|
9A350 |
Spraying or fogging systems, specially designed or modified for fitting to aircraft, "lighter-than-air vehicles" or unmanned aerial vehicles, and specially designed components therefor, as follows:
Technical Notes:
|
9B Test, Inspection and Production Equipment
|
Note |
9B includes test, inspection and production equipment applicable to aero, aero-derivative, industrial or marine gas turbine engines. |
|
9B001 |
Manufacturing equipment, tooling or fixtures, as follows:
|
|
9B002 |
On-line (real time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, having all of the following:
|
|
9B003 |
Equipment specially designed for the "production" or test of gas turbine engine brush seals designed to operate at tip speeds exceeding 335 m/s and temperatures in excess of 773 K (500 °C), and specially designed components or accessories therefor. |
|
9B004 |
Tools, dies or fixtures, for the solid-state joining of "superalloy", titanium or intermetallic aerofoil-to-disk combinations described in 9E003.a.3. or 9E003.a.6. for gas turbine engines. |
|
9B005 |
On-line (real time) control systems, instrumentation (including sensors) or automated data acquisition and processing equipment, specially designed for use with any of the following:
|
|
9B006 |
Acoustic vibration test equipment capable of producing sound pressure levels of 160 dB or more (referenced to 20 μPa) with a rated output of 4 kW or more at a test cell temperature exceeding 1 273 K (1 000 °C), and specially designed quartz heaters therefor.
|
|
9B007 |
Equipment specially designed for inspecting the integrity of rocket motors and using Non-Destructive Test (NDT) techniques other than planar x-ray or basic physical or chemical analysis. |
|
9B008 |
Direct measurement wall skin friction transducers specially designed to operate at a test flow total (stagnation) temperature exceeding 833 K (560 °C). |
|
9B009 |
Tooling specially designed for producing gas turbine engine powder metallurgy rotor components having all of the following:
|
|
9B010 |
Equipment specially designed for the "production" of items specified in 9A012. |
|
9B105 |
Aerodynamic test facilities for speeds of Mach 0,9 or more, usable for 'missiles' and their subsystems.
Notes:
Technical Notes:
|
|
9B106 |
Environmental chambers and anechoic chambers, as follows:
|
|
9B107 |
Aerothermodynamic test facilities, usable for 'missiles', 'missile' rocket propulsion systems, and reentry vehicles and equipment specified in 9A116, having any of the following characteristics:
Notes:
|
|
9B115 |
Specially designed "production equipment" for the systems, sub-systems and components specified in 9A005 to 9A009, 9A011, 9A101, 9A102, 9A105 to 9A109, 9A111, 9A116 to 9A120. |
|
9B116 |
Specially designed "production facilities" for the space launch vehicles specified in 9A004, or systems, sub-systems, and components specified in 9A005 to 9A009, 9A011, 9A101, 9A102, 9A104 to 9A109, 9A111, 9A116 to 9A120 or 'missiles'.
Technical Note: In 9B116 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
|
9B117 |
Test benches or test stands for solid or liquid propellant rockets or rocket motors, having either of the following characteristics:
|
9C Materials
|
9C108 |
Insulation material in bulk form and "interior lining", other than those specified in 9A008, for rocket motor cases usable in "missiles" or specially designed for solid propellant rocket engines specified in 9A007 or 9A107.
Note: In 9C108, insulation intended to be applied to the components of a rocket motor, i.e. the case, nozzle inlets, case closures, includes cured or semi-cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps specified in 9A108. |
|
9C110 |
Resin impregnated fibre prepregs and metal coated fibre preforms therefor, for composite structures, laminates and manufactures specified in 9A110, made either with organic matrix or metal matrix utilising fibrous or filamentary reinforcements having a "specific tensile strength" greater than 7,62 × 104 m and a "specific modulus" greater than 3,18 × 106 m.
|
9D Software
|
9D001 |
"Software", not specified in 9D003 or 9D004, specially designed or modified for the "development" of equipment or "technology", specified in 9A001 to 9A119, 9B or 9E003. |
|
9D002 |
"Software", not specified in 9D003 or 9D004, specially designed or modified for the "production" of equipment specified in 9A001 to 9A119 or 9B. |
|
9D003 |
"Software" incorporating "technology" specified in 9E003.h. and used in "FADEC Systems" for systems specified in 9A or equipment specified in 9B. |
|
9D004 |
Other "software" as follows:
|
|
9D005 |
"Software" specially designed or modified for the operation of items specified in 9A004.e. or 9A004.f.
|
|
9D101 |
"Software" specially designed or modified for the "use" of goods specified in 9B105, 9B106, 9B107, 9B116 or 9B117. |
|
9D103 |
"Software" specially designed for modelling, simulation or design integration of the space launch vehicles specified in 9A004, sounding rockets specified in 9A104 or "missiles", or the subsystems specified in 9A005, 9A007, 9A105, 9A106.c., 9A107, 9A108.c., 9A116 or 9A119.
|
|
9D104 |
"Software" as follows:
|
|
9D105 |
"Software" specially designed or modified to coordinate the function of more than one subsystem, other than that specified in 9D004.e., in space launch vehicles specified in 9A004 or sounding rockets specified in 9A104 or 'missiles'
Technical Note: In 9D105 'missile' means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. |
9E Technology
|
Note: |
"Development" or "production" "technology" specified in 9E001 to 9E003 for gas turbine engines remains controlled when used for repair or overhaul. Excluded from control are: technical data, drawings or documentation for maintenance activities directly associated with calibration, removal or replacement of damaged or unserviceable line replaceable units, including replacement of whole engines or engine modules. |
|
9E001 |
"Technology" according to the General Technology Note for the "development" of equipment or "software", specified in 9A004 to 9A012, 9A350, 9B or 9D. |
|
9E002 |
"Technology" according to the General Technology Note for the "production" of equipment specified in 9A004 to 9A011, 9A350 or 9B.
|
|
9E003 |
Other "technology" as follows:
|
|
9E101 |
“Technology” as follows:
|
|
9E102 |
"Technology" according to the General Technology Note for the "use" of space launch vehicles specified in 9A004, goods specified in 9A005 to 9A011, 'UAV's specified in 9A012 or goods specified in 9A101, 9A102, 9A104 to 9A111, 9A112.a., 9A115 to 9A121, 9B105, 9B106, 9B107, 9B115, 9B116, 9B117, 9D101 or 9D103.
Technical Note: In 9E102 'UAV' means unmanned aerial vehicle systems capable of a range exceeding 300 km. |
Poznámky
(6) Common Military List of the European Union (equipment covered by Council Common Position 2008/944/CFSP defining common rules governing the control of exports of military technology and equipment).
(7) Manufacturers calculating positioning accuracy in accordance with ISO 230-2:1997 or 2006 should consult the competent authorities of the EU Member State in which they are established.
(8) The numbers in parenthesis refer to the Notes following this Table.